What's new
By:

all VM channels gone off?

Willo3092 said:
Those files look familiar 🤔 :smiley:
Click to expand...
Should've atleast tagged you in and said thanks nothing down for that tell him off willo lol
flex007 said:
Hi all I've manage to get it working again and got it working on OSCAM - Looked on another site and got the info below and i don't take credit for this as this is not my own work & hope this benefits everyone;

These are my oscam emu configs for openvix openatv will be similar.

First install oscam emu from your plugin feeds then start oscam emu you can send the attached files in oscam-emu folder to box opnevix will be etc\tuxbox\config I think openatv is now /etc/tuxbox/config/oscam-xxxx xxx being the oscam name so it should be emu


Once files have been sent start oscam via the box.


Now you can type your box ip adress in web browser this should bring up OpenWebif to the left you should see extras choose OSCam Webinterface


This should now take you to oscam interface on the top bar choose readers choose that

you should see Sky_line and VM_line readers

Choose edit to add server,port and username and password

On VM line reader tick:

Drop CWs with wrong checksum:
Skip CWs checksum test:

You can disable the sky line from there if not needed

Save then choose edit on emulator emu again tick:

Drop CWs with wrong checksum:
Skip CWs checksum test:

Also check caid 1841


If you want more virgin lines edit oscam.server file and add a new reader i.e


Code:
[reader]
label = VM_line2
protocol = newcamd
device = server,port
key = 0102030405060708091011121314
user = username
password = password
connectoninit = 1
caid = 1841
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
dropbadcws = 1
disablecrccws = 1

In my case I just added the last 3 and it works much better then before.

I did have screenshots to upload but it seems my uploads are too big.
Click to expand...
If there willo files you should atleast stated instead of making it look like your own work
 
I got zgemma h9.2h and all channels have gone was using mgcamd 3.8 trying same line with oscam but doesn't work any help would be appreciated maybe I need new line
 
stemc28 said:
I got zgemma h9.2h and all channels have gone was using mgcamd 3.8 trying same line with oscam but doesn't work any help would be appreciated maybe I need new line
Click to expand...

You need mgcamd (1.45c-r4.0) delete 3.8 and install the latest version from your plugin softcams feed.
 
stemc28 said:
I got zgemma h9.2h and all channels have gone was using mgcamd 3.8 trying same line with oscam but doesn't work any help would be appreciated maybe I need new line
Click to expand...
Your provider needs to have updated server side if he hasn't updated then won't clear till he's done what needs to be done your using arm box so maybe different for your box
 
sb94707 said:
some help plz. im on zgemma h5.2tc using wooshbuild infinity. supplier has said to use oscam instead of newcamd.list so a few questions..
1) does this sound reasonable - lincsat did say something similar. ?
2) i see lots of versions of oscams, which one should be there ? oscam-emu(120+git1789) is present.
3) do i just put my details in the oscam.server, (in /usr/keys/oscam_atv_emu/oscam.server) and leave other files alone.. ive put my line info in there, but no luck so far.
4) how do i tell the box to use oscam ? in my softcam setu, i only see mgcamd ? no option to change.

any help welcome
Click to expand...
this is what my provider said to me when i asked him to please send me the oscam line cause i am using mgcamed line and people says oscam line is working ******Your like the 90th person to mention techkings if it was as simple as ticking 2 boxes it would be up and running by now .
 
mehmood said:
this is what my provider said to me when i asked him to please send me the oscam line cause i am using mgcamed line and people says oscam line is working ******Your like the 90th person to mention techkings if it was as simple as ticking 2 boxes it would be up and running by now .
Click to expand...
You've just posted same thing on another thread
 
stemc28 said:
Don't think I can use 1.45 h9.2h box is arm
Click to expand...
No you cant. you will need to switch to oscam and if the fix that has been mentioned for oscam is not working then it means your provider hasn't fixed his end.

mehmood said:
this is what my provider said to me when i asked him to please send me the oscam line cause i am using mgcamed line and people says oscam line is working ******Your like the 90th person to mention techkings if it was as simple as ticking 2 boxes it would be up and running by now .
Click to expand...
The two tick boxes fix it on users end, but the server also has to have settings changed and the info to do it is freely available. If he is a cache server then he can't do much until the providers he gets his shares from have fixed it.
 
Have other people got all the channels back or are some still missing, there are a number of SD channels such as nicktoons 5star+1 which are still not clearing. Asked my provider and he has stated that his server only has local cards not cache
 
hasanmusa said:
Have other people got all the channels back or are some still missing, there are a number of SD channels such as nicktoons 5star+1 which are still not clearing. Asked my provider and he has stated that his server only has local cards not cache
Click to expand...
Both are working for me

1_0_1_2C5_7_F020_FFFF0000_0_0_0_20200429200137.jpg
 
Thanks must be my provider issue. just been through the channels and roughly about 60% are working. will have to give him more time to repair otherwise time to look for a new line. Do i need to add any more to my configs besides the disable lines. i have also got my timeout set at 18000. ALso what image and cam are you using for your uno 4k, i also have this box
 
hasanmusa said:
Thanks must be my provider issue. just been through the channels and roughly about 60% are working. will have to give him more time to repair otherwise time to look for a new line. Do i need to add any more to my configs besides the disable lines. i have also got my timeout set at 18000. ALso what image and cam are you using for your uno 4k, i also have this box
Click to expand...
if he is a server with purely local cards then one fix fixes ALL CHANNELS. if 60% of your channels are working then on a local card provider all of the channels would be working
 
hasanmusa said:
Thanks must be my provider issue. just been through the channels and roughly about 60% are working. will have to give him more time to repair otherwise time to look for a new line. Do i need to add any more to my configs besides the disable lines. i have also got my timeout set at 18000
Click to expand...

grog68 said:
if he is a server with purely local cards then one fix fixes ALL CHANNELS. if 60% of your channels are working then on a local card provider all of the channels would be working
Click to expand...

thanks will have to wait and see what happens with the provider, no kids TV during lockdown is not a good thing
 
hasanmusa said:
Have other people got all the channels back or are some still missing, there are a number of SD channels such as nicktoons 5star+1 which are still not clearing. Asked my provider and he has stated that his server only has local cards not cache
Click to expand...
Yeah same here those channels are black and a few others
 
I have cartoon channels working but +1 versions not same with some entertainment channels. Possibly they've removed the shares that had these channels. They might have been shares that have not had the fix but had to remove them to stop freezing.

Most channels work for me for the ones that don't most don't even see the line trying to connect ie no cam info on second infobar. I use sat (my sat line is down aswel) so I don't really notice these channels.
 
I got most of mine back, but thats because I took another sub from an old provider, still no sd channels though, but gonna keep the line anyway and it will always do as a back up, thats if my current provider ever gets back up and running again, but we need to still give it a bit more time yet
 
You must log in or register to reply here.
Back
Top