Fixed!! Bought a Tractec ECO line 5-1000mhz splitter from my local sat shop, these are the ones vm engineers use.
correct cable splitters to use
- Thread starter cactikid
- Start date
Fixed!! Bought a Tractec ECO line 5-1000mhz splitter from my local sat shop, these are the ones vm engineers use.
Hi guys this is my first post so be gentle . I'm new to this and hope this is the right place to ask.
Please help!!!!!
Just set up zgemma h2h with VM and earthnet, and have a great picture with very little glitch if any at all. Until...
Until I connect any other device over WiFi?! And I mean anything! Literally the second I switch on WiFi on my phone or ipad the picture starts glitching. watching a YouTube video on my ipad/phone(streams perfectly) but the picture on tv starts glitching really bad! So bad I've had to have all 7 devices over WiFi have to be switched off just to be able to watch TV?
I've checked all wires and connectors seem correct and I also have used a two way splitter (5-2400 mhz) which I've now read bad things about? Should I be using a (5-1000mhz?)
In the past I've used a sky box f3 and never had any problems using lots of devices (streaming over WiFi) around the house at the same time so I doubt the problem is because of too many devices being used at once? I'm stuck what to do????
Please help!!!!!
Just set up zgemma h2h with VM and earthnet, and have a great picture with very little glitch if any at all. Until...
Until I connect any other device over WiFi?! And I mean anything! Literally the second I switch on WiFi on my phone or ipad the picture starts glitching. watching a YouTube video on my ipad/phone(streams perfectly) but the picture on tv starts glitching really bad! So bad I've had to have all 7 devices over WiFi have to be switched off just to be able to watch TV?
I've checked all wires and connectors seem correct and I also have used a two way splitter (5-2400 mhz) which I've now read bad things about? Should I be using a (5-1000mhz?)
In the past I've used a sky box f3 and never had any problems using lots of devices (streaming over WiFi) around the house at the same time so I doubt the problem is because of too many devices being used at once? I'm stuck what to do????
Thanks, have ordered the recommended splitter now, will let you know how I get on ☺️
Hi everyone, I'm having a bit of splitter issue which I hope you can me with please.
So, I've just received my splitter in the post.
However I tried to connect it the vermin white box in my house and it doesn't have the right connectors!
The white box doesn't have the pin to screw the splitter into, it has the same connection port (sorry I don't know the correct terminology!) as the splitter.
Is there anything that I can do? I'm in desperate need of help! Thanks guys.
So, I've just received my splitter in the post.
However I tried to connect it the vermin white box in my house and it doesn't have the right connectors!
The white box doesn't have the pin to screw the splitter into, it has the same connection port (sorry I don't know the correct terminology!) as the splitter.
Is there anything that I can do? I'm in desperate need of help! Thanks guys.
Ohh ok! I bought one "wf100" to plug into my zgemma! Should I purchase another one for the splitter, or use the one I have and purchase a different kind of cable to plug into my zgemma?
Thanks for answering! I appreciate my question sounds like I am clueless about this set up and admittedly I am! I'm only getting by thanks to the kindness of people on this forum.
Very helpful. Thank you!
Boxalite
Newbie
You can buy them from here, just select the colour and length that you want.
http://m.ebay.co.uk/itm/VIRGIN-MEDI...%3A21405e1315d0ab1c8c73ce86ffede359%7Ciid%3A6
It is suggested that you use the shortest possible cable to avoid signal loss.
FreeUK
Member
Purchase the 5-1000 3.7db type
