dsayers2014 vix4.100 series for the h2h with one set of bouquets

[Yellow!99]

The adaptor for the sky lead is the same adaptor that has been used on the slys own box, so all i did was remove the cable from the sly box (with the adaptor already on) and put it to the back of the H2H.

The router is upstairs and the H2H downstairs, there was no VM connection downstaors, so had a 2nd connection fitted in order to get the VM lead to the back of the H2H.

No ethernet cable in the back of the box? I thought it was just VM an Sly cables at back, my fault

1st time doing this, but its a great learning experience and thanks again for your help dsayers, you da man :)

What adapter for the sky lead?

---------- Post Merged at 06:54 PM ----------

Also how are you connecting the box to the Internet?

 

[dsayers2014]

Yes you need an Internet connection to the box lan cable or homeplugs it won't work without a network connection because autobouqetesmarker connects to my server when scanning to download my latest sat_282_sky_uk_CustomMix.xml file

 

[Yellow!99]

Will the ethernet have to be plugged in all the time in the box or can it be removed after downloading sat_282_sky_uk_CustomMix.xml file?
Could not beig connected to the internet have caused the previous errors?

Yes you need an Internet connection to the box lan cable or homeplugs it won't work without a network connection because autobouqetesmarker connects to my server when scanning to download my latest sat_282_sky_uk_CustomMix.xml file

 

[dsayers2014]

It needs a network connection all the time to be able to connect to your line provider and unscramble the channels

But yes that would be causing the error reboots because it can't connect to my server so you will have a 404 error

---------- Post Merged at 07:25 PM ----------

I did ask you in post 347 if your getting a network connection and you said yes

---------- Post Merged at 07:37 PM ----------

To get round the terminology have a look here http://www.techkings.org/general-satellite-discussion/93169-general-satellite-terminology.html

 

[Yellow!99]

Is it possible to get a wirless network connection to the box, maybe using a wifi dongle

zgemma wifi | eBay

or other option is the home plugs you mentioned - because the router being upstairs and the VM and Sly downstairs I don't want to have a massive cable from the router running from upstairs to downstairs.

One love dsayers...sorry my heads been all over the place today re: 347...been on this all day trying to get it to work.

It needs a network connection all the time to be able to connect to your line provider and unscramble the channels

But yes that would be causing the error reboots because it can't connect to my server so you will have a 404 error

---------- Post Merged at 07:25 PM ----------

I did ask you in post 347 if your getting a network connection and you said yes

 

[dsayers2014]

You could try a Wifi adapter but homeplugs are better

 

[shah1]

40961 is what I'm using and from Bradford... Dsayers - noticed that Sky Sports 3 listing were incorrect on both Sky and VM just now??

 

[dsayers2014]

Menu, setup,system, epg choose load/save/delete choose delete. re run crossepg then blue button on remote and choose epgrefresh

---------- Post Merged on 24-07-2016 at 12:00 AM ----------

Mines showing tennis Washington 500 and that's correct with the sky tv guide

 

[Yellow!99]

I can see 40961 but its listed as Barnsley, is yours showing the same or can you see it Bradford? Are you selecting this from within ABM menu as I can't see it on mine?

40961 is what I'm using and from Bradford... Dsayers - noticed that Sky Sports 3 listing were incorrect on both Sky and VM just now??

 

[dsayers2014]

I thought that you said it was on there but showing as Barnsley?

 

[Yellow!99]

Its on there as 40961 but showing as Barnsley, I thought shah1 had it showing as bradford on his box

I thought that you said it was on there but showing as Barnsley?

 

[shah1]

Its on there as 40961 but showing as Barnsley, I thought shah1 had it showing as bradford on his box

I thought that you said it was on there but showing as Barnsley?

Sorry mate I've picked it as 40961 Barnsley.. Works perfectly fine.

Your inbox is full mate.

 

[dsayers2014]

I'll give you 2 something to try soon

 

[Yellow!99]

I've cleaned up the inbox, try sending the PM now mate!

Its on there as 40961 but showing as Barnsley, I thought shah1 had it showing as bradford on his box

I thought that you said it was on there but showing as Barnsley?

Sorry mate I've picked it as 40961 Barnsley.. Works perfectly fine.

Your inbox is full mate.

---------- Post Merged at 12:55 PM ----------

Sounds interesting dsayers!! :-)

I'll give you 2 something to try soon

 

[dsayers2014]

Sounds interesting dsayers!! :-)

I'll give you 2 something to try soon

It doesn't matter i was trying to add bradford as a provider it wont work just use Barnsley hopefully you should be sorted

 

[Paddie79]

When you bring up the EPG does it always take 2 seconds to generate? I get the a message up saying generating or something similar?

 

[cactikid]

to me sounds like epg not setup or stored correctly to usb or hdd

 

[dsayers2014]

When you bring up the EPG does it always take 2 seconds to generate? I get the a message up saying generating or something similar?

even my official sky box used to do that it wont be instant it needs to get the info from your storage device

 

[heybarley]

Why does the HD epg keep showing the wrong programmes on some channels? Sky hits hd is saying Apollo 13 and its not, and Sky sports 2 hd is saying twenty twenty cricket?

 

[dsayers2014]

Why does the HD epg keep showing the wrong programmes on some channels? Sky hits hd is saying Apollo 13 and its not, and Sky sports 2 hd is saying twenty twenty cricket?

in epg try press load/save/delete choose delete rerun crossepg then press blue button and choose epg refresh now. im not sure why it show the incorrect info the epg for vm is supposed to come direct from there feed