English Commentary

Just popped out but it's on a 80cm dish I've just put up at ground level today 55% signal quality.
 
Last edited:
D-Smart have switched to using long CW's so if you want S Sport back on 42E then you will have to disable CW Cycle checking for 092B:000000

Once done it opens just like it always did, providing of course that the person giving it to you has also done this too.
Tried now but not worked. Can you please send me your config settings please or do I need to do something as well.
 
As I said the person giving 092B to you has to have done this as well, and if someone's giving it to him then they have to do this too. Its a chain and all hops have to do it. If just one server in the chain hasnt, then it means black screens for all those after that server. This was how it was for Vermin and Sky Germany. It takes time for the information to filter through to everyone. Remember they only made these changes Today.
 
As I said the person giving 092B to you has to have done this as well, and if someone's giving it to him then they have to do this too. Its a chain and all hops have to do it. If just one server in the chain hasnt, then it means black screens for all those after that server. This was how it was for Vermin and Sky Germany. It takes time for the information to filter through to everyone. Remember they only made these changes Today.

Thanks mate. That make sense now. Will wait then.

Cheers
 
SS Sports or SS sport football on 16e, its not all providers that have it though, as I know a few that dont on 16e, even mines can be hit and miss, but the same channels work perfect on 42e. No games advertised to be on those channels on 16e today, just 42e. sorry, scratch that Milan, Barca and Arsenal games meant to be on later.
 
Last edited:
D-Smart have switched to using long CW's so if you want S Sport back on 42E then you will have to disable CW Cycle checking for 092B:000000

Once done it opens just like it always did, providing of course that the person giving it to you has also done this too.
Are we talking about adding this disablecrccws_only_for = 092B:000000 to the oscam.server file for each line?
 
Are we talking about adding this disablecrccws_only_for = 092B:000000 to the oscam.server file for each line?

linesman66

posted this yesterday so you might as well just replace the lot in each reader.

Update for the latest
Caids
disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,043800,050F00,051A00,051A10;1811:003311,003315;1815:000000;1819:00006D;1802:000000;1880:000000;1884:000000;1708:000000;0E00:000000;09BE:000000;092B:000000;4AEE:000001;0B00:000000;0B02:000000;0D97:000000;0653:000000;092F:000000;092B:000000
 
set this my side and server side, disablecrccws_only_for = 092B:000000 but clears for a second and then freezes, is this ok for anyone?
 
I'm having similar difficulties. Doesn't clear on my regular line, even though the cards include 092B.

I've tried a test line. The seller didn't have 092B in the 'disablecrccws,' so I've added it, but, as mentioned by Svenlorenz, it clears only for a couple of seconds, before going black again.

Does anyone know what the issue could be?
 
I'm having similar difficulties. Doesn't clear on my regular line, even though the cards include 092B.

I've tried a test line. The seller didn't have 092B in the 'disablecrccws,' so I've added it, but, as mentioned by Svenlorenz, it clears only for a couple of seconds, before going black again.

Does anyone know what the issue could be?
try with only that line in oscam,change the refresh http and poll to 10 seconds under "CONFIG" "Webif" and try with Cache-EX-Mode: 1-CACHE PULL under "READERS"
 
try with only that line in oscam,change the refresh http and poll to 10 seconds under "CONFIG" "Webif" and try with Cache-EX-Mode: 1-CACHE PULL under "READERS"
Thanks for that. I was only using one seller's line at a time. My refresh http and poll were already set to 10 seconds. I changed Cache EX Mode to: 1-Cache Pull. Saved and restarted OSCAM but the issue persists. Channel works for a couple of seconds then freezes for about 30 seconds or more.

In Readers there's a Cache EX Mode setting for both cccam_ext and emu on seperate lines. I tried initially changing the Cache EX Mode to: 1-Cache Pull on each one seperatatly before doing both together. Still no joy.
 
Thanks for that. I was only using one seller's line at a time. My refresh http and poll were already set to 10 seconds. I changed Cache EX Mode to: 1-Cache Pull. Saved and restarted OSCAM but the issue persists. Channel works for a couple of seconds then freezes for about 30 seconds or more.

In Readers there's a Cache EX Mode setting for both cccam_ext and emu on seperate lines. I tried initially changing the Cache EX Mode to: 1-Cache Pull on each one seperatatly before doing both together. Still no joy.
You will have to keep try others, probably the share your using.
 
Contacted my seller about S Sport. He appeared to change something at his end and came back telling me to try it again. It previously didn't work at all on his line. Now it works for 2 seconds before freezing for several minutes.

Got back to him and he told me they don't have a source for DSmart as no one at his server is receiving Turksat so it can't be added. Albeit 092B still shows as an available card within my OSCAM browser using his line.

Try another share

When you say "another share" do you mean get a test line from someone else?
 
Back
Top