dsayers2014
VIP Member
Why all? Not all areas are affected, unless we can use either.Attached a fix with all NetID's pointing to modulation="5" instead of 3 ::
Why all? Not all areas are affected, unless we can use either.Attached a fix with all NetID's pointing to modulation="5" instead of 3 ::
Not all regions have changed.Attached a fix with all NetID's pointing to modulation="5" instead of 3 ::
http://www.techkings.org/threads/failed-to-tune-abm.144448/page-6#post-913637I’m in 41048 not hot my new tuner working yet . But my mate has a full genuine virmin sub . Is there anything I can do to help re info from his box ??
Ignore if daft question .
Not all regions have changed.
I have amended the official ABM file with all changed details that have been supplied so far
Why all? Not all areas are affected, unless we can use either.
< 2747.719> [eDVBFrontend9] tuning to 666750 khz, sr 6952000, fec 0, modulation 5, inversion 2
< 2747.719> [eDVBFrontend9] tune setting type to 1 from 0
< 2747.719> [eDVBChannel] OURSTATE: tuning
< 2747.727> [eDVBFrontend9] startTuneTimeout 5000
< 2747.727> [eDVBFrontend9] setFrontend 1
< 2747.727> [eDVBFrontend9] setting frontend
< 2747.727> [eDVBFrontend9] fe event: status 0, inversion off, m_tuning 1
< 2747.824> [ABM-main][checkTunerLock] TUNING
< 2747.928> [ABM-main][checkTunerLock] TUNING
< 2748.035> [ABM-main][checkTunerLock] TUNING
< 2748.139> [ABM-main][checkTunerLock] TUNING
< 2748.244> [ABM-main][checkTunerLock] TUNING
< 2748.348> [ABM-main][checkTunerLock] TUNING
< 2748.453> [ABM-main][checkTunerLock] TUNING
< 2748.557> [ABM-main][checkTunerLock] TUNING
< 2748.662> [ABM-main][checkTunerLock] TUNING
< 2748.784> [ABM-main][checkTunerLock] TUNING
< 2748.889> [ABM-main][checkTunerLock] TUNING
< 2748.993> [ABM-main][checkTunerLock] TUNING
< 2749.097> [ABM-main][checkTunerLock] TUNING
< 2749.202> [ABM-main][checkTunerLock] TUNING
< 2749.307> [ABM-main][checkTunerLock] TUNING
< 2749.411> [ABM-main][checkTunerLock] TUNING
< 2749.515> [ABM-main][checkTunerLock] TUNING
< 2749.619> [ABM-main][checkTunerLock] TUNING
< 2749.724> [ABM-main][checkTunerLock] TUNING
< 2749.829> [ABM-main][checkTunerLock] TUNING
< 2749.935> [ABM-main][checkTunerLock] TUNING
< 2750.039> [ABM-main][checkTunerLock] TUNING
< 2750.144> [ABM-main][checkTunerLock] TUNING
< 2750.249> [ABM-main][checkTunerLock] TUNING
< 2750.353> [ABM-main][checkTunerLock] TUNING
< 2750.458> [ABM-main][checkTunerLock] TUNING
< 2750.562> [ABM-main][checkTunerLock] TUNING
< 2750.667> [ABM-main][checkTunerLock] TUNING
< 2750.784> [ABM-main][checkTunerLock] TUNING
< 2750.888> [ABM-main][checkTunerLock] TUNING
< 2750.993> [ABM-main][checkTunerLock] TUNING
< 2751.098> [ABM-main][checkTunerLock] TUNING
< 2751.202> [ABM-main][checkTunerLock] TUNING
< 2751.307> [ABM-main][checkTunerLock] TUNING
< 2751.411> [ABM-main][checkTunerLock] TUNING
< 2751.516> [ABM-main][checkTunerLock] TUNING
< 2751.620> [ABM-main][checkTunerLock] TUNING
< 2751.725> [ABM-main][checkTunerLock] TUNING
< 2751.829> [ABM-main][checkTunerLock] TUNING
< 2751.936> [ABM-main][checkTunerLock] TUNING
< 2752.040> [ABM-main][checkTunerLock] TUNING
< 2752.145> [ABM-main][checkTunerLock] TUNING
< 2752.249> [ABM-main][checkTunerLock] TUNING
< 2752.354> [ABM-main][checkTunerLock] TUNING
< 2752.458> [ABM-main][checkTunerLock] TUNING
< 2752.562> [ABM-main][checkTunerLock] TUNING
< 2752.667> [ABM-main][checkTunerLock] TUNING
< 2752.727> [eDVBChannel] OURSTATE: failed, fatal
< 2752.784> [ABM-main][checkTunerLock] TUNING FAILED FATAL
ok my net id is 00002 abm gives error ..tried diff builds all the same...
so if you go to all channels or fav menu all channels still there..so yiz all no
netid glasgow
netid edinbrugh has problems aswell so wee need an update or a pull ..from reading above
http://www.techkings.org/threads/failed-to-tune-abm.144448/page-6#post-913637
Place that on your box mate.
For some reason my box won't scan all systemsFor the ABM provider files to be updated, someone has to provide the data. Can we please check the commit log before updating config file? If 00001 was udated, and someone in 00002 has a similar issue, updating it will not change things for them.
The commit log for ABM as a whole is here
https://github.com/oe-alliance/AutoBouquetsMaker/commits/master
The commit log for the virgin file is here
https://github.com/oe-alliance/Auto...toBouquetsMaker/providers/cable_uk_virgin.xml
We have historically used the 64 QAM details because these were the data frequencies. ABM can tune on any frequency for UK cable, there is no home frequency for UK cable
The process should be as follows:
Set all Cable tuners to Virgin All systems. It does not matter what NetID you use in tuner config. You can leave it at 00000.
Clear all cable services
Up (next to OK) > Green (satellites/extended) > Highlight Cable services > menu > removes services.
Perform a non-abm scan. Manual, make sure you select complete.
Once the scan has completed, check what the details are for "Virgin TV Highlights", "Virgin Movies and store". Most skins will show you the details. Picture attached.
Qam 64 = Modulation 3
Qam 256 = Modulation 5
There are some areas with 6887 symbol rates others with 6952
Edit your ABM provider file in /usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/providers
Use a linux compatible editor like Notepad++ to do the editing. (Don't confuse with windows notepad. If you use a windows editor, the file is not shown correctly.)
Delete the providers.cache file
Run ABM. If it works, submit a pull request or raise an issue on GitHub. If not confident in doing so, post details on forum, someone will do it for you.
A screenshot showing the frequency will be enough. Don't post your cam details.
View attachment 35754
View attachment 35755
The easy option is to update the provider file using the option in ABM.Thanks , where is
“cable_uk_virgin.xml” found please mate ?
It does not scan or does not find anything?For some reason my box won't scan all systems
Hi mate, Downloaded this and extracted it once it was downloaded tried to flash the box but it was just saying boot then loading uo without flash, ive tried 3 usb sticks any idea how i can get it on with any other build tried wooshbuild and still no picture but scans ll the channelsThanks a lot mate, hopefully this works I'll give it a go when I get home from work tonight
left it so a while and it eventually finished scan did everything else you put but ABM still wont scan just gonna have to wait until its updated. But thanks anywayIt does not scan or does not find anything?
If it does not find anything, how long did you wait? It has to go through all the listed frequencies in that part of cables.xml, so it is easy to think nothing is happening.
It does not scan or does not find anything?
If it does not find anything, how long did you wait? It has to go through all the listed frequencies in that part of cables.xml, so it is easy to think nothing is happening.
At most, 4 transponders would have changed parameters, all others will be unchanged
Not sure what the overall meaning of your post is. After the manual scanning completed, did it find channels?left it so a while and it eventually finished scan did everything else you put but ABM still wont scan just gonna have to wait until its updated. But thanks anyway
You are using the wrong details. UK does not use 6950, it uses 6952 or 6887. Manchester is an ex CW area, I am sure you should have decimal places for your frequency.some reason wont let me post a picture so this is the info on the box after a scan
666 MHz
695000
QAM256-3/4
NET ID - 41066
Yeah sorry about that it should of readYou are using the wrong details. UK does not use 6950, it uses 6952 or 6887. Manchester is an ex CW area, I am sure you should have decimal places for your frequency.
Anyway, I have updated the ABM file for 41066. Changed to qam256 (modulation =5).Update the ABM provider file and run ABM again.
Did you update the ABM proviider/config file?i pulling my hair out done all the stuff mentioned manual scan delete blah blah run abm still get error allso if i go into all channels they are there just abm wont kick in help ..before a hammer goes threw it lol...xt 8500 and 00002 glasgow
just the cable_uk_virgin .xl file you mean or is there someit i missedDid you update the ABM proviider/config file?