A full scan on cable takes longer as its scanning all,manual scan might only scan 1 frequency?
There is no 6887 provider. Selecting provider bypasses those options. Please post what is helpful to others, not your usual 6887 non-sense.
If you want to help people, you should advise:
Tuner configuration:
Set every tuner with Cable signal wire attached to DVB-C mode.
Any tuners without signal wires should be disabled/not configured. (Some receivers do not have internal splitters)
Network ID = 00000. Leave it as 00000. it does not matter what you use in tuner configuration in the UK or Ireland
Service scan type = Provider ( this is default for most images)
Country = UK
Region = Set the correct Virgin system. If you dont know or unsure it, set it as "Virgin UK All systems"
Scanning:
Using ABM is not the same as scanning.
Perform a manual scan. ensure complete is selected, not predefined transponder.
Using ABM:
If you want to "scan" using ABM, ensure your network ID is entered where it says Region in the Provider menu. Leave the one in tuner configuration as 00000
If you dont want to help people, continue posting the 6887