What's new
By:

"idiots guide" to installing sucmnsee's image with EVERY step explained in detail

I followed the instructions, I went in to usr then key and edited the line! Cws= then the code with spaces after the host password etc and left the 01,02,03 afterwards, is this incorrect?
 
Awesome work mate....believe it or not when I set up my box few days ago, as a complete newb to this,I had to flick between this guide and one other, to get head around entering line and other bits not included....but now your guide is complete! Would def be worried if anyone had problems now....there needs to be a sticky thread where people can post usb sticks they've used and had luck/no luck with, so others can benefit...thumbs up again
 
Last edited:
Thanks for this great guide, i was using an old skybox for years and read a few times about these boxes but was put off by some of the tutorials, then found this one and went ahead and ordered an H1, all sorted within 30 mins, plus it was handy the region being set to Northern Ireland bit less searching ;)
 
Thanks Rusty for your 'Idiots Guide' after struggling for a couple of days getting Openvix to install and Bluehd menu and then failing to add a cline, I followed your instructions and downloaded sucmnsee version and got the cline working, this seems a more user friendly version with loads more extras, shame the TSMEADIA does not work too well although I did get showbox to work. I am new to this having been used to f5 boxes, this is on the Zgemma box, a lot more complicated but well worth it when you get it sorted.

Just one more thing if any of the frequencies change is there an easy way to update the channels, thanks again to sucmnsee and rusty..:yes!:
 
Hi new to this hope I don't frustrate any of you experienced guys, basically I follow all these steps and my box is up and running right? Thanks.
 
The box does a scan every morning for all the channels, so you will never need to hunt for a missing existing channel. The only fly in the ointment is if a new channel comes into being.....
 
Gashey said:
Thanks Rusty for your 'Idiots Guide' after struggling for a couple of days getting Openvix to install and Bluehd menu and then failing to add a cline, I followed your instructions and downloaded sucmnsee version and got the cline working, this seems a more user friendly version with loads more extras, shame the TSMEADIA does not work too well although I did get showbox to work. I am new to this having been used to f5 boxes, this is on the Zgemma box, a lot more complicated but well worth it when you get it sorted.

Just one more thing if any of the frequencies change is there an easy way to update the channels, thanks again to sucmnsee and rusty..:yes!:
Click to expand...

Most recent updates frequencies at 6am and epg at 6.25
 
Hi guys I'm using a sandisc 64gb to set up my recording side of the box but having no luck! Just says internal hd! I've got a 1 gb spurious stick that I put in and it works with that but no way big enough! Can you guys suggest a good size one I can use without any issues?

Cheers guys
 
Gwallygaga
Follow sucmnsee and rustyMG guides and you will never go wrong! As long as your USB is compatable with the box you will have no issues! Theses boys know the crack!
 
Hi following steps and my box said flashing and then displayed a failed message although the the image and list of channels are there what have I done wrong, thanks.

I seem to have it all set up but I'm not getting channels apart from fta, I tried a test line and I think that's the problem because it didn't look like the example in the guide, it began c: if that means anything at all maybe I just put it in wrong any help would be greatly appreciated, thanks.

BER bar on signal check is empty if that means anything to.
 
Last edited:
Yes if you are getting no signal check you have them in tuner A and lnb in you should get a signal Your C line needs to go in the etc folder complete as it is then start CCcam in softcam manager via blue button on remote


Sent from my iPhone using Tapatalk
 
RustyMG said:
Now updated!
Please see page one everyone.....
Click to expand...

Hey Rusty, first of all, thanks for the update and the additional detail. My original installation (as a complete newbie) was done with the help of our Tich. I have tried not to muck about with the nice settings from sucmnsee. My question now is, to use this update, do I need to repeat the steps Tich and I took to setup my box i.e. format and setup USB, download and flash with the updated image, enter line etc...? Or what?

Cheers.
 
great thread got set up no problem .......two questions how do i get setanta ireland and how to i remove the duff sly hd channels from epg cause the obviously dont work ......cheers
 
Firstly have to say thank you you guys are fantastic on here, I am hooked to tech kings after this experience, one last problem hopefully I need help with, my box is running with channels via a test line I was surfing through and after 20 minutes I got a fatal line error but then box restarted and all channels still on, is this anything to worry about, thanks again.
 
Gwallygaga said:
Firstly have to say thank you you guys are fantastic on here, I am hooked to tech kings after this experience, one last problem hopefully I need help with, my box is running with channels via a test line I was surfing through and after 20 minutes I got a fatal line error but then box restarted and all channels still on, is this anything to worry about, thanks again.
Click to expand...

In my opinion, nothing to worry about. Might have been a minor connection glitch. One thing I have found is that, these boxes once settled and up and fully running, work flawlessly.
 
Have you found out how to edit channel list and remove these channels? This would be a massive help if you can erase these hd channels!

Cheers
 
You must log in or register to reply here.
Back
Top