"idiots guide" to installing sucmnsee's image with EVERY step explained in detail
- Thread starter RustyMG
- Start date
dsayers2014
VIP Member
Yes you can just press menu, setup, vix, imagemanager and press green for new backup Then plug your usb/hard drive in the new box go to backup manager and restore. Doing this will include your line details
The new box will be completely stock. Should I flash an image onto it first and then do a restore or could I restore from the configured boxes backup image straight away?
dsayers2014
VIP Member
just restore straight away im not sure of the menus for openatv just have a look for image manager and restore like i said this includes your line details so check with your provider if they allow multiroom two boxes in the same ip at the same time if not turn off the original box while restoring the second box then add new line
just redid the whole procedure and still no luck and getting error message on payed channels ''service not found! (SID not found in PAT)'' the amount of time ive wasted trying to do this is getting on my tits! so if someone has a solution that would be amazing!
edit: nevermind ive got it working!!!!!!!
edit: nevermind ive got it working!!!!!!!
Last edited:
Briano1975
Newbie
Thanks very much RustyMG. Just what I needed.
i am one of those idiots.recently bought the zgemma and dobt have a clue where to start.i am using the openvix software downloaded from zgemma site.
---------- Post Merged at 08:51 PM ----------
sorry wrong thread
---------- Post Merged at 08:58 PM ----------
recently signed up mate cant get the downloads.complete newbie was using a f5s before.my gift is still valid but dont know where to start.
any help would be uuseful.
---------- Post Merged at 08:51 PM ----------
sorry wrong thread
---------- Post Merged at 08:58 PM ----------
recently signed up mate cant get the downloads.complete newbie was using a f5s before.my gift is still valid but dont know where to start.
any help would be uuseful.
chickenman
Newbie
hi guys, firstly thanks to you all for putting this together, and this forum is a fantastic help. i have followed this guide through and all went well. only problem i have is that all the 'hd' channels are showing up in my epg, and obviously not working. so channel 6 is sky hd and nothing plays, is there a way to swap these channels out for the sd equivalents? perhaps my setting are incorrect in the autobouquets maker? if i change these would i have to sort out the epg again?
many thanks.
many thanks.
Hi guys
Its driving me nuts. Initially i loaded my H2S with sucemnsee's first image and it loaded fine although i never did get my n lines working. Tried loading the latest image file from USB but cant tell whether its loaded or not. With USB in it starts up - shows 'BOOT' then the numerical sequence: no mention of 'FLASH'. After it will only boot with the image usb inserted, or no usb at all. If i use the storage drive (1TB NTFS external) the screen shows 'BOOT' then hangs. HELP!!
Its driving me nuts. Initially i loaded my H2S with sucemnsee's first image and it loaded fine although i never did get my n lines working. Tried loading the latest image file from USB but cant tell whether its loaded or not. With USB in it starts up - shows 'BOOT' then the numerical sequence: no mention of 'FLASH'. After it will only boot with the image usb inserted, or no usb at all. If i use the storage drive (1TB NTFS external) the screen shows 'BOOT' then hangs. HELP!!
mark5211
Newbie
RE: just restore straight away im not sure of the menus for openatv just have a look for image manager and restore like i said this includes your line details so check with your provider if they allow multiroom two boxes in the same ip at the same time if not turn off the original box while restoring the second box then add new line
Worked brilliantly, saved me a few hours setting up boxes, thanks!
Worked brilliantly, saved me a few hours setting up boxes, thanks!
Last edited:
hi, im having problems putting my line on, my newcamd.list looks like this after a flash
CWS = vm.server.com 12000 user-10980 168248 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = tv.server.com 10100 user-7321 1285612 01 02 03 04 05 06 07 08 09 10 11 12 13 14
i have host,port,user,pass but where do they go? noob! vm.server.com(host) 1200(port) user(user) but where does the password go? 10980 168248?
CWS = vm.server.com 12000 user-10980 168248 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = tv.server.com 10100 user-7321 1285612 01 02 03 04 05 06 07 08 09 10 11 12 13 14
i have host,port,user,pass but where do they go? noob! vm.server.com(host) 1200(port) user(user) but where does the password go? 10980 168248?
utterlyfab
Member
Mate u should take this down anyone could use your line now
Sent from my SM-G900F using Tapatalk
utterlyfab
Member
no where does that go? also get an error on startup SID?
BeakyFord
TK Veteran
Last edited:
utterlyfab
Member
Ignore my last comment only just read the details and see they're sucmnsees example lines lol. So as user above said,if you follow instructions it's easy. Just use your remote to delete the line already there and enter the details your supplier has given. It is best to ftp so no mistakes,but not everyone knows how to do that
Sent from my SM-G900F using Tapatalk
ok lines in and ive followed the bit for scanning channels only getting freesat channels? still getting sid error on startup too