What's new
By:

"idiots guide" to installing sucmnsee's image with EVERY step explained in detail

Members,


I just got Zgemma H.2H box and I was wondering the setup guide to actually follow, either;


1) Zgemma H1 full VM Setup guide **available at**
http://www.techkings.org/zgemma-star-h1/84710-zgemma-h1-full-vm-setup-guide.html


OR


2) "idiots guide" to installing sucmnsee's image with EVERY step explained in detail **available at**
http://www.techkings.org/zgemma-star-2s/74983-idiots-guide-installing-sucmnsees-image-


every-step-explained-detail.html


In the above cases, I don't want to damage this box by installing wrong softwares and get the box bricked - as it happened to me with my skybox F5.


Please, I don't mind brain storming for hours but I want to be sure I'm being guided with correct softwares for right model of box (Zgemma H.2H).


Thanks for your assistance in advance.
 
Hi guys,

Total all newbie here, so forgive my silly question. Where can I find a line provider please?

I'm about to pull the trigger on buying a Zgemma S2 and been reading on here for ages, so think I am ready and able to set up using the idiots guide. everyone on here seems super helpful, so might be asking a few more questions before I'm fully up and running...
 
Ok, I'm being thick here. I have done all the above. I have Mgcamd 1.38 running in the TS soft cam menu. I have entered my N line in the second one down and entered CWS_KEEPALIVE = 60 in the top line??? what am i doing wrong?
 
Number70 said:
Ok, I'm being thick here. I have done all the above. I have Mgcamd 1.38 running in the TS soft cam menu. I have entered my N line in the second one down and entered CWS_KEEPALIVE = 60 in the top line??? what am i doing wrong?
Click to expand...
No I had this problem too mate. Check in the var/keys folder and see if there's a file called mgcfg

Sent from my SM-G900F using Tapatalk
 
welcome to hell ;)

in general satellite forum there is a thread in the stickies where you can request a test line or full line. Read the other stickies in that section before committing to anyone though.
 
TickTack said:
Hi guys,

Total all newbie here, so forgive my silly question. Where can I find a line provider please?

I'm about to pull the trigger on buying a Zgemma S2 and been reading on here for ages, so think I am ready and able to set up using the idiots guide. everyone on here seems super helpful, so might be asking a few more questions before I'm fully up and running...
Click to expand...
There's a thread about pay servers. Just go on there and post what u looking for e.g Sly or Vermin,n/c line etc

Sent from my SM-G900F using Tapatalk
 
Have checked i may of deleted this. What do i need to do once found? Thanks

---------- Post Merged at 10:14 PM ----------

utterlyfab said:
Number70 said:
Ok, I'm being thick here. I have done all the above. I have Mgcamd 1.38 running in the TS soft cam menu. I have entered my N line in the second one down and entered CWS_KEEPALIVE = 60 in the top line??? what am i doing wrong?
Click to expand...
No I had this problem too mate. Check in the var/keys folder and see if there's a file called mgcfg

Sent from my SM-G900F using Tapatalk
Click to expand...

Have checked, can't see it i may of deleted it. What do i need to do once found? Thanks
 
Number70 said:
Have checked i may of deleted this. What do i need to do once found? Thanks

---------- Post Merged at 10:14 PM ----------

utterlyfab said:
Number70 said:
Ok, I'm being thick here. I have done all the above. I have Mgcamd 1.38 running in the TS soft cam menu. I have entered my N line in the second one down and entered CWS_KEEPALIVE = 60 in the top line??? what am i doing wrong?
Click to expand...
No I had this problem too mate. Check in the var/keys folder and see if there's a file called mgcfg

Sent from my SM-G900F using Tapatalk
Click to expand...

Have checked, can't see it i may of deleted it. What do i need to do once found? Thanks
Click to expand...
It wasn't on there for me. If you give me your email address,I'll send u the file. You need to put it on a usb stick and transfer it onto your box,putting it into the var/keys file

Sent from my SM-G900F using Tapatalk
 
Number70 said:
Have checked i may of deleted this. What do i need to do once found? Thanks

---------- Post Merged at 10:14 PM ----------

utterlyfab said:
Number70 said:
Ok, I'm being thick here. I have done all the above. I have Mgcamd 1.38 running in the TS soft cam menu. I have entered my N line in the second one down and entered CWS_KEEPALIVE = 60 in the top line??? what am i doing wrong?
Click to expand...
No I had this problem too mate. Check in the var/keys folder and see if there's a file called mgcfg

Sent from my SM-G900F using Tapatalk
Click to expand...

Have checked, can't see it i may of deleted it. What do i need to do once found? Thanks
Click to expand...
Have you tried stopping and restarting your cam?

Sent from my SM-G900F using Tapatalk
 
I followed this guide. I had no issues. Everything worked like he said.. thank you everyone who contributed I'm happy to be up and running
 
utterlyfab said:
It wasn't on there for me. If you give me your email address,I'll send u the file. You need to put it on a usb stick and transfer it onto your box,putting it into the var/keys file

Sent from my SM-G900F using Tapatalk
Click to expand...

Thanks for the help mate.... Much appreciated! Got it going with your help.
 
Sorry I am new to this and have bought a ZGemma Star 2S, I am in the U.K. and have followed the "Idiots Guide to installing sucmnsee`s image file" But I am stuck with the bit about Nline. Do I have to purchase a Nline from a provider??? And if so where can I purchase one from??

P.S. have tried to find it on filezilla but it won`t login. Have found the box`s ip address but won`t login using "root" as password....????
P.P.S my 4g usb stick is not being recognised as a hard drive even though I have fully formatted it to NTFS
 
SteMing said:
Sorry I am new to this and have bought a ZGemma Star 2S, I am in the U.K. and have followed the "Idiots Guide to installing sucmnsee`s image file" But I am stuck with the bit about Nline. Do I have to purchase a Nline from a provider??? And if so where can I purchase one from??

P.S. have tried to find it on filezilla but it won`t login. Have found the box`s ip address but won`t login using "root" as password....????
P.P.S my 4g usb stick is not being recognised as a hard drive even though I have fully formatted it to NTFS
Click to expand...
You need to buy a line from provider. There's a sticky thread in the forum you can request one. And some USB sticks don't work. Try a Kingston

Sent from my SM-G900F using Tapatalk
 
In FileZilla make sure it is the client version in host place up address then host is root. Then quick connect


Sent from my iPhone using Tapatalk
 
Thanks guys now have filezilla connected, can you PM me with details of providers plz I had one but they want me to directly transfer money to their bank account??
 
Hey guys. Family member wants one of these boxes,but only has one Sly feed coming in. What does that mean for them,will they still be able to record,pause,etc.Also I have all the adult channels,and have kids using the TV,any way to block them or have a content filter on?thanks in advance

Sent from my SM-G900F using Tapatalk
 
Last edited:
utterlyfab said:
Hey guys. Family member wants one of these boxes,but only has one Sly feed coming in. What does that mean for them? Will they still be able to record,pause,etc. Also I have all the adult channels,and have kids using the TV,any way to block them or have a content filter on?thanks in advance

Sent from my SM-G900F using Tapatalk
Click to expand...



Sent from my SM-G900F using Tapatalk
 
You must log in or register to reply here.
Back
Top