NLINE Format

[Number70]

Hi guys,

Trying to copy my server line from my old blade 7000 onto my new hs2

i have a separate section for password id address etc on blade, i need to put this into a line that the zgemma can read, any help would be appreciated?

 

[FreeUK]

This is what your line looks like on the BM 70000s:

name: Connection_0
ip: myserver.no-ip.com
user: username
password: password
protocol: newcamd525
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
filtermode: auto
filterindex: 0
port: 12000
timeout: 3

and this is what it should look like on the H.S2

N: line example = CWS = myserver.no-ip.com 12000 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

C: Line example = C: myserver.no-ip.com 12000 username password


That is your line converted from the Blade box and needs to go into your newcamd.list file located in /usr/keys folder, or if its a C: line goes into /etc folder inside Cccam.cfg

 

[Number70]

This is what your line looks like on the BM 70000s:

name: Connection_0
ip: myserver.no-ip.com
user: username
password: password
protocol: newcamd525
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
filtermode: auto
filterindex: 0
port: 12000
timeout: 3

and this is what it should look like on the H.S2

N: line example = CWS = myserver.no-ip.com 12000 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

C: Line example = C: myserver.no-ip.com 12000 username password


That is your line converted from the Blade box and needs to go into your newcamd.list file located in /usr/keys folder, or if its a C: line goes into /etc folder inside Cccam.cfg

Top stuff that mate!! know anything on getting picons on the h2s?

---------- Post Merged at 08:40 PM ----------

That is your line converted from the Blade box and needs to go into your newcamd.list file located in /usr/keys folder, or if its a C: line goes into /etc folder inside Cccam.cfg

Just to clarify... i click usr/keys/ then either mg_cam or newcamd? i believe mine is a cline. In the mg_cam section it has a load of info.

 

[FreeUK]

If yours is a C: Line then it goes into either /etc folder or /usr/keys folder depending on which image you use but C: goes into CCcam.cfg

 

[Number70]

If yours is a C: Line then it goes into either /etc folder or /usr/keys folder depending on which image you use but C: goes into CCcam.cfg

In that folder i only have mg_cfg and newcamd.list folders their?