HD51 4K Oscam help!! At wits end.

Fared

Registered
Hello,

I had to reflash my box and have flashed OpenATV.

I have setup both tuners and scanned - all good.

I can't get Oscam to work. I have tried loads of different ones been through all the forums, have 25 browser tabs open right now, been at it since Friday and at my wits end. When I did this last year it took me a week and managed to get it going drunk one night.

Could someone with a Mutant HD51 let me know which softcam to/they use and any tips please?

Much appreciated,
F
 

hedges2016

TK Veteran
You need armv7a oscam go to oscams website or look for
OpenATV Softcam feed.ipk
Then when you install the softcam feed you can press green button then green button again then go down to softcam and install oscam
 

Fared

Registered
You need armv7a oscam go to oscams website or look for
OpenATV Softcam feed.ipk
Then when you install the softcam feed you can press green button then green button again then go down to softcam and install oscam
Any chance you can post a link?
 

Fared

Registered
You need armv7a oscam go to oscams website or look for
OpenATV Softcam feed.ipk
Then when you install the softcam feed you can press green button then green button again then go down to softcam and install oscam
Thanks for your help, all sorted now.
 

Fared

Registered
Having some freezing issues. Every few minutes, hoping it's my oscam.server file because I can't spend another weekend working on this. Anything obviously wrong with this?

[reader]
label=hd51
enable=1
protocol=cccam
device=Server,port
user=username
password=password
cccversion=2.2.1
group=1
cccamkeepalive=


Using:
Oscam 11392
Mutant hd51
Openatv

Hopefully I am missing a line or something as all clearing, just freezing now and then.

Any further help appreciated.

F
 

pabloescaban

VIP Member
Forum Supporter
Having some freezing issues. Every few minutes, hoping it's my oscam.server file because I can't spend another weekend working on this. Anything obviously wrong with this?

[reader]
label=hd51
enable=1
protocol=cccam
device=Server,port
user=username
password=password
cccversion=2.2.1
group=1
cccamkeepalive=


Using:
Oscam 11392
Mutant hd51
Openatv

Hopefully I am missing a line or something as all clearing, just freezing now and then.

Any further help appreciated.

F
You've got oscam set to use Cccam 2.2.1 to open the line, this is an old bit of kit, if you can get your provider to change the line to newcam format,
put this reader in your server file, obviously replace yellow text with your details:
___________________________________________________________________
[reader]
label=VM-Server1
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=server,port
user=user
password=password
disableserverfilter = 1
connectoninit = 1
caid = 1841
ident = 1841:000000,005B01,005A01,005B02,005B03
group = 1
_______________________________________________________________________

if it's a C line your'e using, download CCcam version 2.3.2 and use this instead of oscam to open the line
 

Willo3092

VIP Member
Forum Supporter
This is a VM newcamd line:

[reader]
label = VM-server
enable = 1
protocol = newcamd
device = server,port
key = 0102030405060708091011121314
user = username
password= password

connectoninit = 1
caid = 1841
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

This is a VM CCcam line:

label= VM-server
enable=1
protocol=cccam
device=server,port
user = username
password= password
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
 

Fared

Registered
Using a Cline but hd51 is an Arm
You've got oscam set to use Cccam 2.2.1 to open the line, this is an old bit of kit, if you can get your provider to change the line to newcam format,
put this reader in your server file, obviously replace yellow text with your details:
___________________________________________________________________
[reader]
label=VM-Server1
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=server,port
user=user
password=password
disableserverfilter = 1
connectoninit = 1
caid = 1841
ident = 1841:000000,005B01,005A01,005B02,005B03
group = 1
_______________________________________________________________________

if it's a C line your'e using, download CCcam version 2.3.2 and use this instead of oscam to open the line
Have to use Oscam because of Arm receiver. Sorted now though, thanks for your reply.
 

Fared

Registered
This is a VM newcamd line:

[reader]
label = VM-server
enable = 1
protocol = newcamd
device = server,port
key = 0102030405060708091011121314
user = username
password= password

connectoninit = 1
caid = 1841
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

This is a VM CCcam line:

label= VM-server
enable=1
protocol=cccam
device=server,port
user = username
password= password
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0

This has done the trick and all working. Thanks for your help.
 
Top