Is this an original please it has a chip on it help please I am doing a firmware update it install everything but when it starts it start loading it shows the bootloader on the tv but then it stops and on the decoder screen shows Vu+solo2 and stops
Yes I tried some different images vix blackhole for my Vu+ solo2 but it installs starts loading then it stops and the decoder screen stops Vu+solo2 and nothing happens and tv is blackWhat image did you use and is it correct for your named box.
How did you flash it by usb max size of 8gb and file extracted to usb , no other usb devices plugged in.
Or online couch flash.
Is your box an original or clone as firmware matters.
Bad install of firmware possibly and needs re-doing
Sorry but I am not that technicalTry flashing using putty:
Code:wget --no-check-certificate -O install_vanilla_vix.sh https://www.willobuild.net/files/scripts/install_vanilla_vix.sh?dl=1 && bash install_vanilla_vix.sh
If you have one of the correct amperage try another PSUYes I tried some different images vix blackhole for my Vu+ solo2 but it installs starts loading then it stops and the decoder screen stops Vu+solo2 and nothing happens and tv is black
Try a different PSU for the receiver, make sure it's the same voltage but a higher wattage, EG if you have 12V 3W, use a 12V 5W power supplySorry but I am not that technical
Maybe it's what you are saying but I have also connected it with motorbike 12 volt battery which I think it must be of a higher wattage but with the same result but I will try another psu with 5 Watts or higher thanks mateTry a different PSU for the receiver, make sure it's the same voltage but a higher wattage, EG if you have 12V 3W, use a 12V 5W power supply
I meant amps, just check the one that came with the box and try a higher powered one eg;Maybe it's what you are saying but I have also connected it with motorbike 12 volt battery which I think it must be of a higher wattage but with the same result but I will try another psu with 5 Watts or higher thanks mate
Yes the one that came with the box is 3 ampI meant amps, just check the one that came with the box and try a higher powered one eg;
12V 1.5A/2.5A AC DC Power Supply Adapter Safety Charger For LED Light UK plug | eBay
Its a common fault with enigma2 boxes, the PSU loses power until it's not strong enough to boot up the box, try a 5A supply, you may have one already, often old routers or other small devices have themYes the one that came with the box is 3 amp
Thanks hope to try it todayIts a common fault with enigma2 boxes, the PSU loses power until it's not strong enough to boot up the box, try a 5A supply, you may have one already, often old routers or other small devices have them
Thanks hope to try it todaIts a common fault with enigma2 boxes, the PSU loses power until it's not strong enough to boot up the box, try a 5A supply, you may have one already, often old routers or other small devices have them
I tried a 25amps psu but the same it loads and stops vu+solo2Try a different PSU for the receiver, make sure it's the same voltage but a higher wattage, EG if you have 12V 3W, use a 12V 5W power supply