What's new
By:

WilloBuild WilloBuild OpenViX 6.7 Series

Abu Baniaz said:
Please try post 1799. It most probably is the file system of flash drive.
Click to expand...
It Works but not as you say.

Process -

Flash Box with OpenVix 6.7 - Zgemma Images
Initialize USB/HDD & mount per instructions in walkthrough
In multiboot manager, Reboot into PIP mode. (Flashing with OpenVix 6.7 puts it in Kodi Mode)
Now run Putty, connect and run script. (Box Reboots but does not display the option to boot into Willow's downloaded script)
Open Backup Manager your see Willow's file - Run it and it works

What a pain in my ass
 
Blizzard17 said:
It Works but not as you say.
Click to expand...
It works, but not as you've been doing it
! evil laugh.gif


I'm pretty sure that if you put a proper hdd or ssd in the box and initialise it to ext4 properly, you would be able to ditch the USB and all the issues you've had.
I'm glad you got it going in the end :smiley: 👍
 
Why anyone would not put an ssd in a Zgemma is beyond me even a 120gb is about £12.00. You have probably spent that on electricity.

keep us posted I give it a few days at best.
 
Last edited:
Every day you learn something new, i work in IT/Broadcast world and have to say this was a pain to do. Should have been simple as you say, stuck in my ways with the USB life but hey will upgrade now. Thanks to everyone for your help. So will have a look at the IPEE get that setup and go from there. No dount i will be back lol
 
I have a EPG issue to resolve. So i have dug around found the EPG import section and have setup where it should pull that data from. Currently i have the following -

20250627_174515.jpg


20250627_174541.jpg

20250627_174553.jpg


Still no EPG showing up in the grid when EPG is requested, maybe i should wait bit longer
 
Blizzard17 said:
I have a EPG issue to resolve. So i have dug around found the EPG import section and have setup where it should pull that data from. Currently i have the following -

View attachment 122006

View attachment 122007
View attachment 122008

Still no EPG showing up in the grid when EPG is requested, maybe i should wait bit longer
Click to expand...
Your own supplier should be listed in sources, Might be worth rebooting box if you have added the playlists txt file and created bouquets
 
have you signed up with an IPTV provider either for a trial or payment? And then you get an email with an instruction, have you got that?
 
I already have a provider not that stupid lol... I have a link for the EPG but does not seem to pull in the data I would have expected to see. Should be in the thousands for events
 
Blizzard17 said:
I already have a provider not that stupid lol... I have a link for the EPG but does not seem to pull in the data I would have expected to see. Should be in the thousands for events
Click to expand...
In EPG importer plugin the sources normally show the supplier URL not just as IPTV as in the picture above.

How did you add the details into BMX ? Did you edit the playlists txt file to input details. Normally m3u long line.
 
moshibeth said:
In EPG importer plugin the sources normally show the supplier URL not just as IPTV as in the picture above.

How did you add the details into BMX ? Did you edit the playlists txt file to input details. Normally m3u long line.
Click to expand...
I didnt do this, I manually added the details in BMX.
20250627_190354.jpg
I then ticked yes to use alternative EPG url -

20250627_190426.jpg
I can't show the next page obviously.

Have I done this all wrong then 😆
 
Dw its pulled the data in it just took ages

20250627_190835.jpg

So we are completed. Its only taken about a week to get it running lol

Big thanks to all that helped i do appreciate it
 
I've never had to add an alternative url for the epg.
BMX usually just creates the EPG source and channel list in EPG Importer from the m3u in playlists.txt.
 
Off topic, if you want to take screenshots instead of taking pictures, see here:
dsayers2014

Thread 'Taking screen shots and uploading attachments to the forum'

Using OpenWebif to take a screenshot

1. Find out the receiver's IP address by pressing/selecting on your remote: Menu > Information > Network


2. Open your web browser on PC. In the address/search bar, input/type the receiver's IP address

3. Click on Grab screenshot

Screenshot1.png


4.
Right click on the picture,
Click on "Save Image As"
A window will open, you can select where to save the file
You can also change the name. Using numbers as prefixes helps


Screenshot2.png


5.
To take another screenshot, if in another menu, click on the screenshot button again
Repeat of step 4
  • Like
 
You must log in or register to reply here.
Back
Top