Zgemma crash please help

[Anthony2021]

Hi guys. My zgemma h7bis stuck on this for the last half hour. How do i.sort it. Thanks in advance. Openvix wildbuild 6.8

 

[pabloescaban]

Take the batteries out of the remote.
Unplug the receiver and power it back on.

Then put the batteries in the remote and see if it does it again, there could be a button stuck in on the handset

 

[Anthony2021]

Take the batteries out of the remote.
Unplug the receiver and power it back on.

Then put the batteries in the remote and see if it does it again, there could be a button stuck in on the handset

Unfortunately that didn't work

 

[pabloescaban]

The timeshift error shenanigans looks like a recording error, go into recordings settings and make sure nothing is set to record, reboot and try again

 

[Anthony2021]

The timeshift error shenanigans looks like a recording error, go into recordings settings and make sure nothing is set to record, reboot and try again

How do i access the setting. Its just going around circles and finishes with that message. Won't allow.me.access.the menu

 

[cactikid]

If you use a laptop can you enter via WEBIF ?

 

[moshibeth]

How do i access the setting. Its just going around circles and finishes with that message. Won't allow.me.access.the menu

Reflash it mate it's much less hassle then you should be good for another couple of years.

 

[pabloescaban]

If you can access it by webif, using the box ip address via lappy or phone, click terminal and type in

init 4
enigma2
Click enter, then reboot the box, this should stop the boot loop you've been seeing

 

[Anthony2021]

If you can access it by webif, using the box ip address via lappy or phone, click terminal and type in

init 4
enigma2
Click enter, then reboot the box, this should stop the boot loop you've been seeing

I cant access using webif, would filezila work?

 

[Anthony2021]

I just download Teamviewer if anyone can help remotely.

 

[pabloescaban]

I just download Teamviewer if anyone can help remotely.

Have you sorted it now?
I can teamviewer in if you want?
Pm sent

 

[Anthony2021]

Have you sorted it now?
I can teamviewer in if you want?
Pm sent

No havent sorted it yet. PM you details

 

[Abu Baniaz]

I cant access using webif, would filezila work?

Openwebif runs within Enigma2. If Enigma2 is crashing, you can't use the terminal client in openwebif. Use a proper telnet client like Putty or telnet client in window to connect to the receiver and issue the commands.

The changed files by KIddac are here:
Fix openvix crash due to amendment of parameters · kiddac/shared-skin-components@25a8e44
You can also manually install kiddac's skin componenets ipk too.

But Willow makes some modifications to them as far as I know. He is on holiday