Ok, thanks for that. I've been having a look at the DiseqC switch that I have at the moment(never looked at it since the day it was installed, so bear with me).
I've attached a pic as well, which may serve better than my explanation, but here goes anyway!
So, in the picture you can see two feeds at the back of the switch(one for 19.2, and one for 13.0). At the front I just have one cable coming out of the switch, and this leads into my technomate box, providing channels from both of these satellites.
Just to reiterate I have 2 dishes, one sky dish at 28.2, and the other dish with 2 lnb's pointing at 19.2 and 13.
So, if I were to purchase a new diseq switch with a 3 or 4 way splitter rather than the 2 way that I currently have, could I plug one of my feeds from 28.2(to go with the feeds for 19.2 and 13)into the new switch, run one cable out of the switch to the zgemma(hopefully bringing feeds from the 3 satellites), and then finally plug my remaining feed from the 28.2 dish into the other lnb input on my zgemma, thereby still enabling me to record one channel and watch another on 28.2, but adding the other 2 satellites for good measure?
View attachment 22882