sorry mate not had time yet but basically i did ... menu/setup/system/network/device setup/then choose WLAN connection/
then choose scan wireless networks/select/highlight your wireless network and press green button on remote/ now you will see
user interface so just press the right arrow on remote and now make sure network name is the same as your wifi network/scroll down
to encryption and press right arrow on remote and here i chose WPA or WPA2 and the scroll down 1 to encryption key and put in your
wifi password using your ABC 123 keys on your remote and then press green to save/and now choose OK/yes to activate this network
now it will say a second configuration has been found so here i chose not to disable so i can swap between wifi and ethernet and when it
finishes restart the box
Hi folks first post so be gentle i was tinkering on zgemma with wifi adaptor and got it working,so follow these steps.
menu,setup,system,network,,device setup,WLAN connection, scan wireless connections find yours.
press green button,turn use interface from no to yes.
scroll to Encryption key enter you wifi password press the yes option a few times and wait for it to activate.
Hope this works.