dooby2oon
VIP Member
CARLING-1.04.ups - Downloads - TechKings
Whats needed
1. Starview 6 or 7
2. A usb pen drive with latest carling firmware on it
3. A working modem/router connection to net
From the main menu go to Utility and then press the right arrow button and select usb
from the right hand side, you will see the Carling/Guinness file press ok on it and make sure to select SW+ALL DATA UPDATE..
The machine will update and restart itself (Don't pull your memory stick out until the machine has fully started up and you can access menu again)
you now need to scan your channels, No spliters on your incoming cable when doing your scan and dont connect modem/router untill scan completed
Now go to installation press the right arrow button again and go down to AUTO CABLE SEARCH
all you need to change here is the symbol rate.
The symbol rate determines your area for example N*l is 6887, the other numbers are 6952 for Telepe** and EXc&w.
When you have selected your area go to start scan.
once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "Key edit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.
Then go to to your channels by exiting the menu and pressing ok..
Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE SO BE PATIENT
Next two lines skip for starview 7
Now go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.
To use with LAN connection.
Menu - Option -networks - net application - select type “Ustream(UK)
Now connect to your modem/router to receive all channels
If you have 16:9 TV please follow “ Option -> OSD Setup -> Screen Format
Whats needed
1. Starview 6 or 7
2. A usb pen drive with latest carling firmware on it
3. A working modem/router connection to net
From the main menu go to Utility and then press the right arrow button and select usb
from the right hand side, you will see the Carling/Guinness file press ok on it and make sure to select SW+ALL DATA UPDATE..
The machine will update and restart itself (Don't pull your memory stick out until the machine has fully started up and you can access menu again)
you now need to scan your channels, No spliters on your incoming cable when doing your scan and dont connect modem/router untill scan completed
Now go to installation press the right arrow button again and go down to AUTO CABLE SEARCH
all you need to change here is the symbol rate.
The symbol rate determines your area for example N*l is 6887, the other numbers are 6952 for Telepe** and EXc&w.
When you have selected your area go to start scan.
once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "Key edit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.
Then go to to your channels by exiting the menu and pressing ok..
Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE SO BE PATIENT
Next two lines skip for starview 7
Now go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.
To use with LAN connection.
Menu - Option -networks - net application - select type “Ustream(UK)
Now connect to your modem/router to receive all channels
If you have 16:9 TV please follow “ Option -> OSD Setup -> Screen Format
Last edited: