Drox
TK Veteran
You probably need at least a 1.2m, and even that may be too small
See below
Football Feeds Live On Satellite
Viark VIARK TYPE BOXES
- Thread starter wheelo
- Start date
See below
Football Feeds Live On Satellite
pieeater2015
TK Veteran
Is the bein sports channels on 42 east english, i know they took the prem league rights from SSport a while back, then SSport they stopped broadcasting on that sat.
Kyser143
TK Veteran
About 99% sure they won't be ...I have seen the streams via the bein turkey app and mo English option so unlikely to be on sat either
manic01
TK Veteran
manic01
TK Veteran
Depends where in UK, I get it on 1.1dish in SW UK but can suffer rain fade
manic01
TK Veteran
Also on Nova Sport 2 HD 1w/23.5e with eng Comms atm
Afternoon guys. Having some strange issues with Viark sat 4k. Just bought it off eBay. I have used my v8 uhd channel list which loaded without issue. However I am getting many channels that are saying s=91,q=0 this ranges anywhere from bbc two to tnt sports 1. It’s using same dish as the v8 uhd. To rule out the ch list I have done some scans but it will not find tnt sports 1 aswell as 3 and 5 also. The box did come with usals selected 19.2 & 4w ( I think) or something scanned in. Could there be anything from previous user that’s causing these issues. Thanks in advance.
manic01
TK Veteran
Check lnb and diseqc settings
Thanks will give that a go tomorrow. Any special instructions I need to be aware of? Will I lose any of the subscription? Was only converted couple of weeks ago.
kegnkiwi
TK Veteran
Should be fine as it goes on yours boxes serial number.
Jerboa
Member
No, I just checked.
Hi
So I am just reloading pt 1.18 on then factory reset then scan? Just double checking. Cheers.
Yeah thats the way.
Excellent. So re-installed pt 1.18 then went into installation/factory reset/all ( think that’s correct) and applied that. Would it be correct that I still have a boat load of 19.2e channels still in list?
Jester1
Member
Yes force loaded when you update, you can delete or loading a channel list will overwrite it.
Ok. So after doing following
scan = Astra 2(28.2e)
Scan mode = all channels
start search = satellite search
remove existing channels YES
Network search = Yes
I am only pulling in 412 channels total from 86 transponders. Something doesn’t seem correct. I still have 19.2e and 30w what seems to be pre-installed.
scan = Astra 2(28.2e)
Scan mode = all channels
start search = satellite search
remove existing channels YES
Network search = Yes
I am only pulling in 412 channels total from 86 transponders. Something doesn’t seem correct. I still have 19.2e and 30w what seems to be pre-installed.
Jester1
Member
I assume your dish is fixed to 28e so if you dont need 19e and 30w just delete them then I would go back and do a blind scan on 28e