dsayers2014 vix4.100 series for the h2h with one set of bouquets

Status
Not open for further replies.
Hi guys having issues with my VM channels again - not showing anything, think it maybe down to the line itself as this has happened before!! Do you think its time to get a new line?
 
Yes try a test line from the cable recommend a line section

Rescanned autobuquetmaker and channels have come back to life.. So clearly not a line issue. However, I'm not getting Sky Sports F1 in HD - is that part of the VM channels?

try a test line to rule it out im not sure of what else to try.

for sky sports f1hd its changed the channel number on vm im currently having issues logging in my server once i sort it out ill let you know to rescan
 
Yes try a test line from the cable recommend a line section

Rescanned autobuquetmaker and channels have come back to life.. So clearly not a line issue. However, I'm not getting Sky Sports F1 in HD - is that part of the VM channels?

try a test line to rule it out im not sure of what else to try.

for sky sports f1hd its changed the channel number on vm im currently having issues logging in my server once i sort it out ill let you know to rescan

Sorted rescan abm
 
Yes try a test line from the cable recommend a line section

Rescanned autobuquetmaker and channels have come back to life.. So clearly not a line issue. However, I'm not getting Sky Sports F1 in HD - is that part of the VM channels?

try a test line to rule it out im not sure of what else to try.

for sky sports f1hd its changed the channel number on vm im currently having issues logging in my server once i sort it out ill let you know to rescan

Sorted rescan abm

Done - up and running again thanks.
 
Having real probs with my H2H Zgemma I put Vix4 on but when i do a scan for channels i always get a timeout from what i have read it is down to tuner settings, what do i do for net id ? i am in yorkshire and the town i live in isn't in the net id link lists so would i choose the one nearest me ? also in the net id lists all the towns have letters ntl tw and about 10/12 numbers but the net id on the box only has 5 numbers so which and how do i put the 10 numbers and letters into the net id on the box.
I also checked the cable signal on my H2H

SNR = 29%
AGC = 10%
BER = 0%

Locked ticked

From memory the sat signal is

SNR = 100%
AGC = 99%
cant remember BER

Locked ticked

What am i doing wrong ??
 
Can I use this image on a H2.S with a USB DVB-C tuner for the VM channels (assuming I get that bit working)?

In the end I tried this with a Hauppauge solo HD DVB-C tuner but cant find drivers for this one at all on an enigma2 system :(
 
Hi, uber newbie here, I have been trying for 3 days to get my H2H epg working with bouquets, every time I select a bouquet, my system crashes and restarts, it seems no matter what I try, nothing works, I am scared to delve too deep in case I reset the thing and lose my gift, any ideas in how I should proceed would be gratefully accepted.
 
Is there a way to have the correct channel numbers in the sections(tabs) of sports movies etc? its shows like channel number 1520 for Sky Sports 1 when viewing the Sports Tab
 
You have changed generate main bouquet to yes. This is why I have it set to no because to be able to create sections bouquets with all channels bouquet it has to give them new channel numbers to place them in the sections bouquets. In providers change generate main bouquet to no then start scan that will remove the all channels bouquet so entertainment etc show the correct channel numbers

Sent from my SM-G925F using Tapatalk
 
Thanks sorted it :)

See from my screen shot below can you see the gap between the channel number and the channel name is there a way to get rid of the gap it looks like its there for picons ?

13901370_10155046115333625_5604010406450632460_n.jpg
 
No it's to do with the OpenVix Custom EPG plugin it's the epgselection.py that's causing the problem even though the vskin-hd doesn't look as bad

Sent from my SM-G925F using Tapatalk
 
No not for this image, I've found another way to add channel numbers on epg I just need to do another image the way it can be done can be done on openatv so I maybe doing an openatv image

Sent from my SM-G925F using Tapatalk
 
Status
Not open for further replies.
Back
Top