What's new
By:
Filters

Wooshbuild Support Thread

Hi guys looking for instructions on flashing an zgemma i55 with the wooshbuild v7 any help would be great thanks .I,ve got the flash downloaded from wooshs site
 
would anyone kindly upload their script files for wooshbuild 7 toppicks I accidently deleted mine, thanks in anticipation

no worries sorted it
 
Last edited:
Dangs said:
Sorry woosh didn’t mean to imply wooshbuild was broken, I think it is an issue with a lot of images just wondered if you’d guys knew of any patch to allow recording of service refs 5001/5002
Click to expand...
What box are you using?

Is 5001/2 VOD? If not, why don't the service refs start with 1 ? Mine do
 
tearing my hair out at the minute, hopefully someone can help.

I have been trying to do a complete reinstall of my H.2S box (reflashing the box with the W7 files) I keep getting a weird message when it comes to flash and it simply won’t do it at all (photo attached)

I’ve tried redownloading the wooshbuild
Zip file, reformatting both my usb sticks, using both usb sticks to try and flash the box with...nothing works.

Never had an issue reformatting until now. I’m going mad trying to get this to work. Only did a reinstall as I was told to to try and get VPN Setup to work properly

Any ideas?
 

Attachments

  • 64BC7141-CBDB-4CCC-97DC-445C659BFAD7.jpeg
    64BC7141-CBDB-4CCC-97DC-445C659BFAD7.jpeg
    620.1 KB · Views: 33
TechPhobe said:
tearing my hair out at the minute, hopefully someone can help.

I have been trying to do a complete reinstall of my H.2S box (reflashing the box with the W7 files) I keep getting a weird message when it comes to flash and it simply won’t do it at all (photo attached)

I’ve tried redownloading the wooshbuild
Zip file, reformatting both my usb sticks, using both usb sticks to try and flash the box with...nothing works.

Never had an issue reformatting until now. I’m going mad trying to get this to work. Only did a reinstall as I was told to to try and get VPN Setup to work properly

Any ideas?
Click to expand...
Ive just flashed the h2s from basebuild with no problems at all.
Give it another go, if you look in the downloads theres a download by willo that prepares the flash drives
 
TechPhobe said:
tearing my hair out at the minute, hopefully someone can help.

I have been trying to do a complete reinstall of my H.2S box (reflashing the box with the W7 files) I keep getting a weird message when it comes to flash and it simply won’t do it at all (photo attached)

I’ve tried redownloading the wooshbuild
Zip file, reformatting both my usb sticks, using both usb sticks to try and flash the box with...nothing works.

Never had an issue reformatting until now. I’m going mad trying to get this to work. Only did a reinstall as I was told to to try and get VPN Setup to work properly

Any ideas?
Click to expand...
try one of the format tools in downloads and do a full fat 32 format and when you put the the download on the stick if you have saved it to a folder first open folder and put the zgemma folder on usb on start up of box press button on front of box
 
It looks like it is not recognising it as a zip file (invalid magic number).
Put the USB stick into a PC and check it can unzip the file without error.
 
TechPhobe said:
earing my hair out at the minute, hopefully someone can help.

I have been trying to do a complete reinstall of my H.2S box (reflashing the box with the W7 files) I keep getting a weird message when it comes to flash and it simply won’t do it at all (photo attached)

I’ve tried redownloading the wooshbuild
Zip file, reformatting both my usb sticks, using both usb sticks to try and flash the box with...nothing works.

Never had an issue reformatting until now. I’m going mad trying to get this to work. Only did a reinstall as I was told to to try and get VPN Setup to work properly

Any ideas?
Click to expand...
I'm getting exact same issue...
 
when you click on the download you should unzip it with winzip to an empty folder on desktop then put the zgemma folder on your usb
 
gray1313 said:
when you click on the download you should unzip it with winzip to an empty folder on desktop then put the zgemma folder on your usb
Click to expand...
At this stage it is done on the box, they only need to unzip basebuild which appears they have done and flashed.
 
wooshman said:
What box are you using?

Is 5001/2 VOD? If not, why don't the service refs start with 1 ? Mine do
Click to expand...

Have zgemma hs and and vu solo2, IPTV provider when using service ref as 1 gets lot of pixelation, something to do with what they use to get around not using vpn I think
 
jazz997 said:
Looks to be an issue for a few users like myself..
Click to expand...
I have tried both ways one letting basebuild initialize the usb and then create the swap file. Then I tried with selecting no on initialization and both ways worked - I cant make it happen for me unfortunately
 
I am having exactly the same problem, I have downloaded v7 onto 4 different USBs now and am still getting stuck at the same stage every time. I have been in contact with my IPTV provider and he pointed me to Techkings as he said there was nothing he can do. I cannot believe that there are not more people out there who are having this problem and I still haven't seen a solution on here yet.20180316_153036_resized_1.jpg 20180316_153036_resized_1.jpg 20180316_153036_resized_1.jpg
 
divingred-do said:
I am having exactly the same problem, I have downloaded v7 onto 4 different USBs now and am still getting stuck at the same stage every time. I have been in contact with my IPTV provider and he pointed me to Techkings as he said there was nothing he can do. I cannot believe that there are not more people out there who are having this problem and I still haven't seen a solution on here yet.View attachment 32203 View attachment 32203 View attachment 32203
Click to expand...

divingred-do said:
I am having exactly the same problem, I have downloaded v7 onto 4 different USBs now and am still getting stuck at the same stage every time. I have been in contact with my IPTV provider and he pointed me to Techkings as he said there was nothing he can do. I cannot believe that there are not more people out there who are having this problem and I still haven't seen a solution on here yet.View attachment 32203 View attachment 32203 View attachment 32203
Click to expand...
hi mate do you want me to send you the file that ive got?
 
Have friends and family who have Sunday solo2 box’s and would love to be able to get wooshbuild on them without bricking the box
 
You must log in or register to reply here.
Back
Top