What's new
By:
Filters

WooshBuild Wooshbuild Infinity Support Thread

Status
Not open for further replies.
gary burgess said:
installed wooshbuild last night but ipab is still showing up in menu.....what have i missed.....i done other box and its fine...the only thing i can think of is this box is still on atv 6.1 does it need to be on 6.2
Click to expand...
If its booting with ipab can you not flash it online
Blue button > flash online/local > online (green) - If you then press the blue button does it say 6.2
Then green to flash
Then follow the instructions on page one of this thread to install infinity
 
Changed over to this the other day great build. Only issue having is seems box is running slow, getting the blue circle a lot. N on previous build iPab was never getting it. It’s on two boxes H2H and H2S. All same usb and ext HDD as running previous on IPab. Any one the same, or any help to cure it? Thanks.
 
Been getting that too, since I installed infinity, thought I had it fixed a few times but it just came back, I didnt get it on the previous version of wooshbuild, thinking maybe take a re flash to sort it, nothing to lose I suppose, but a back up of current settings is advised 1st.
 
makido said:
If its booting with ipab can you not flash it online
Blue button > flash online/local > online (green) - If you then press the blue button does it say 6.2
Then green to flash
Then follow the instructions on page one of this thread to install infinity
Click to expand...
It's only showing 6.1 or 6.0....gonna download 6.2 to usb stick
 
grahamer67 said:
Been getting that too, since I installed infinity, thought I had it fixed a few times but it just came back, I didnt get it on the previous version of wooshbuild, thinking maybe take a re flash to sort it, nothing to lose I suppose, but a back up of current settings is advised 1st.
Click to expand...

Yeah might give that a go, just the way was on both boxes thought re flash might be same. But worth a go. Is his previous build still available?
 
Largo said:
Yeah might give that a go, just the way was on both boxes thought re flash might be same. But worth a go. Is his previous build still available?
Click to expand...
I went to menu/setup/recording and timeshift/timeshift settings and were it says automatically start timeshift after I changed it from 2 seconds to disable and that seemed to speed up my h2h a bit

don't forget to save and restart box you will not be able to rewind tv but you can still record
 
Last edited by a moderator:
Hi Guys,

I am having problems during the install setup.

I have flashed Openatv. onto box
I am currently at the screen where it asks to access openwebif
when I enter http://wbuildx.co.uk/setup.ipk

the reply comes back with NO such file or directory? then stops...

Can anyone advise further please. I am a novice so any help would be great

Regards

Brett
 
gray1313 said:
I went to menu/setup/recording and timeshift/timeshift settings and were it says automatically start timeshift after I changed it from 2 seconds to disable and that seemed to speed up my h2h a bit
Click to expand...
Yeah I tried that one too and it did seem to help with the speed of the box, but it didnt stop the blue circle.
 
Still cant change numbering mode so that first channel starts as channel 1. BBC 1 in all channels is 101, which means my iptv channels are like 3000 etc. If it started from 1 would be alot better.

Also when i flash woosh, how do you get the IP addresss, of box, when i log on to my hub it doesnt show and have to go through openatv setup, get IP then flash again and hope that IP still works lol...
 
mrblue said:
Still cant change numbering mode so that first channel starts as channel 1. BBC 1 in all channels is 101, which means my iptv channels are like 3000 etc. If it started from 1 would be alot better.

Also when i flash woosh, how do you get the IP addresss, of box, when i log on to my hub it doesnt show and have to go through openatv setup, get IP then flash again and hope that IP still works lol...
Click to expand...

Don't know about your numbering system but to get IP address - Menu - Information - Network
 
mrblue said:
Still cant change numbering mode so that first channel starts as channel 1. BBC 1 in all channels is 101, which means my iptv channels are like 3000 etc. If it started from 1 would be alot better.

Also when i flash woosh, how do you get the IP addresss, of box, when i log on to my hub it doesnt show and have to go through openatv setup, get IP then flash again and hope that IP still works lol...
Click to expand...
This is never going to happen so you may as well forget about it.
Numbering doesn't work like this, the lowest is 101, there is no 100 or 99 and there never will be.
Follow @Spyke advice above to find the network address of the box, you can use this in filezilla or openwebif
 
Hi, I'm trying to re flash a mates Zgemma star 2s,

I have downloaded WB Infinity but during the setup it only had the option for satalite and iptv.

I require to setup with cable.

I have tried all different ways of resolving but to no avail.

Cross epg brings up an error with no dvb-s nims.

I cannot locate any option for virmin bouquets and keep getting tuner lock error.

Would this suggest the tuner is broken?

Tia for your help!
 
pabloescaban said:
This is never going to happen so you may as well forget about it.
Numbering doesn't work like this, the lowest is 101, there is no 100 or 99 and there never will be.
Follow @Spyke advice above to find the network address of the box, you can use this in filezilla or openwebif
Click to expand...

If you set up your own bouquet with favourites you can then configure ABM to place bouquets at the bottom of the list.
The first ABM bouquet will then start at 101 and your bouquet will start at 1.

upload_2018-11-2_0-3-17.png
 
Last edited:
Rileyjohn1 said:
Hi, I'm trying to re flash a mates Zgemma star 2s,

I have downloaded WB Infinity but during the setup it only had the option for satalite and iptv.

I require to setup with cable.

I have tried all different ways of resolving but to no avail.

Cross epg brings up an error with no dvb-s nims.

I cannot locate any option for virmin bouquets and keep getting tuner lock error.

Would this suggest the tuner is broken?

Tia for your help!
Click to expand...
Is that a cable box? I thought that was a sat tuner box only.
 
No, in ABM config set ABM to keep bouquets you've created and to place ABM bouquets at the bottom rather than top of the list.
That way ABM bouquets will start at 101 and yours start at 1.
That's what I had to do for Mrs Willo because keying in 3 numbers is too much to cope with.

EDIT: I used e-channeliser to create a favourites bouquet and place it at the top of the list.
 
Installing Infinity on a Zgeema H9S over OpenATV 6.2 and the install wizard freezes towards the end of 'Installing Plugins' - looking for advice on what the problem could be.
 
hi, hope this doesn't sound stupid, im about to set this up on a new h5 2tc box for cable. ive downloaded the openatv file, it says h5, inside it has some files, do i need to extract them? and i add the h5 folder to the usb or just the files inside? thanks xxScreen Shot 2018-11-03 at 21.13.07.pngScreen Shot 2018-11-03 at 21.13.07.png Screen Shot 2018-11-03 at 21.12.49.png
 
Status
Not open for further replies.
Back
Top