amiko lx800

I am referring to the current v1.4.5 XUI.
Have you tried /formuler on end of portal instead of /c as xcui1 has changed a lot
Xui one is dropping support for Mac address lines so you may have to change it at some point.
haven’t heard about that tbh bud as xcui is rock solid at present
Yes the new XUI can change to user/pass but often it changes it to something with 20 character's per user/pass lol.
XUI has issues, but it is a tad more secure than anything else on the market as we speak.
I've tested this box on a non XUI and it's crashing like no tomorrow sadly. Audio lip sync is also evident.
that’s a security feature why it makes them that long
 
Have you tried /formuler on end of portal instead of /c as xcui1 has changed a lot

haven’t heard about that tbh bud as xcui is rock solid at present

that’s a security feature why it makes them that long
Indeed but who in their right mind would sit and enter ? :) lol
 

Attachments

  • Screenshot 2021-07-24 at 21.58.13.png
    Screenshot 2021-07-24 at 21.58.13.png
    27.8 KB · Views: 11
Is it Mac based your trying
Tried adding it mac and user/pass within the panel mate.
I also changed the mac on the box. I believe it's just incompatibility with the newer Panels.
Works on older panel, but even then it freezes all the time on certain feeds.
 
Tried adding it mac and user/pass within the panel mate.
I also changed the mac on the box. I believe it's just incompatibility with the newer Panels.
Works on older panel, but even then it freezes all the time on certain feeds.
Is the box uptodate
 
Looks like it's the only way :)
Have you tried this update. Dsayers found it

AMIKO_LX800_2.0.7.4_UK.bin

Update release includes:
- Update MyTV for connections issues with new XUI panel

Simple USB firmware update instructions:
1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

Firmware upgrade will begin and STB will reboot once complete

Firmware can be download from here:

http://amiko.co.uk/lx800/AMIKO_LX800_2.0.7.4_UK.bin

Edit seen this

1) With LX800 turned on, booted up and connected to Internet in menu go to SETTINGS > Net Upgrade > Start > OK
2) When asked if you are sure to upgrade to new version choose OK
 
Have you tried this update. Dsayers found it

AMIKO_LX800_2.0.7.4_UK.bin

Update release includes:
- Update MyTV for connections issues with new XUI panel

Simple USB firmware update instructions:
1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

Firmware upgrade will begin and STB will reboot once complete

Firmware can be download from here:

http://amiko.co.uk/lx800/AMIKO_LX800_2.0.7.4_UK.bin

Edit seen this

1) With LX800 turned on, booted up and connected to Internet in menu go to SETTINGS > Net Upgrade > Start > OK
2) When asked if you are sure to upgrade to new version choose OK
Indeed i did all that. This is not my first rodeo :)
There is a later FW too.
Still the same and there is also lots of issues with Lip sync and crashing.
Unit is being returned.
 
Back
Top