H5 missing softcam and collection error on script when installing Wooshbuild Infinity

kevin23

Newbie
Hello looking for some help please, purchase another H5 and got the box running on FTA on Wooshbuild Infinity but when installing I noticed there was some collection error on the script with all the softcams. Now when you press the blue button there is no softcam panel, normally second down on the left .
Do I need manual install them or any ideas ? other box running ok on newcamd.list softcam.
 
Can you try copy and paste this in terminal in openwebif

Code:
rm /etc/opkg/secret-feed.*
opkg remove softcam-feed-universal
opkg update
opkg install https://www.dropbox.com/s/gqdld86g8mibh44/softcam-feed-universal_3.0_all.ipk?dl=1
reboot

Once box reboots try to see if you can download cams from plugins green to download plugins then softcams
 
Can you try copy and paste this in terminal in openwebif

Code:
rm /etc/opkg/secret-feed.*
opkg remove softcam-feed-universal
opkg update
opkg install https://www.dropbox.com/s/gqdld86g8mibh44/softcam-feed-universal_3.0_all.ipk?dl=1
reboot

Once box reboots try to see if you can download cams from plugins green to download plugins then softcams
upload the the code but got this?
 

Attachments

  • Screenshot_2019-05-04 Zgemma H5 - OpenWebif.png
    Screenshot_2019-05-04 Zgemma H5 - OpenWebif.png
    53.4 KB · Views: 47
don't paste the reboot part, this means reboot the box, just paste the top part in then afterwards, reboot the box and see if there's any softcams in the feeds
 
Have same problem myself ,just put wooshbuild infinity on H52TC and no softcam menu any where
Have put ipk file on usb and tried that way not showing
Ftp to box not showing and just tried using Root on openwebif and still not working
 

Attachments

  • 15569920541794085506840134315792.jpg
    15569920541794085506840134315792.jpg
    4.7 MB · Views: 18
Links one line press enter then another line press enter
Or copy and paste line at a time did that and got that screenshot
 
pasted the lines in one by one and clicked enter after each one, got to this stage, going to reboot now and see if the softcam feeds are working:
38817
 
rebooted but nothing showing in downloadable plugins?
nothing showing in ipkg install
@keet
The grogbuild updates came in when i run those command lines one by one, this is on an unused H2s i flashed yesterday to test
 
Ok can you ftp and open /etc/opkg/secret-feed.conf

You may see a link like this
Code:
http://nonpublic.space/oea/6.2/mips32el/Packages.gz

If in the middle it just has /6/ change to /6.2/

That's what was noted on mine and changing to /6.2/ worked

I was getting some help on this on ATV but they've deleted my posts and closed the thread so not much else I can do.
 
Last edited:
Ok can you ftp and open /etc/opkg/secret-feed.conf

You may see a link like this
Code:
http://nonpublic.space/oea/6.2/mips32el/Packages.gz

If in the middle it just has /6/ change to /6.2/

That's what was noted on mine and changing to /6.2/ worked

I was getting some help on this on ATV but they've deleted my posts and closed the thread so not much else I can do.
Done that it as/6/ so changed to 6.2 do I need to go back and do the openwebif thing again
 
Back
Top