What's new
By:

WilloBuild WilloBuild OpenViX 6.9 Series

CH5 have changed parameters, so just scan it and if you have abm set correctly it will replace existing, in signal finder put in 11307H, 27500, 8PSK DVB-S2 and that's what's changed dvb-s to DVB-S2, green to scan. This is what you get. job done
 

Attachments

  • IMG_1474.jpeg
    IMG_1474.jpeg
    396.1 KB · Views: 10
If the manhattan has been setup correctly then it should update automatically. Now when you said gigabyte I read it as Gigablue and that manhattan comes in 2 versions, freeview and freesat. If is defenitely a freesat box and ch5 is not working then you can do a freesat scan and that should bring it back.

Just for info and as I am doing nothing, same has happened to great movies etc just change as above and re scan.
 
Last edited:
Billy315 said:
I found openvix 6.9 never gave me channel 5. So try and get back to 6.8.
Click to expand...
If you want to scan using scanning function in Enigma2, update the satellites.xml file before scanning. There is an "XML update" function in the tuners/scanning menu

Alternatively, if you use ABM or AB 28.2, they do not use the satellites.xml and will obtain the tuning details from the data on the satellite.
 
Abu Baniaz said:
If you want to scan using scanning function in Enigma2, update the satellites.xml file before scanning. There is an "XML update" function in the tuners/scanning menu

Alternatively, if you use ABM or AB 28.2, they do not use the satellites.xml and will obtain the tuning details from the data on the satellite.
Click to expand...
I have now scanned both Gigablue (both satellites) and now receive channel 5. I did check XML and may of used that although not knowing what it was used for. My other problem may have been the numbers on gigablues. I have changed 1 - 8 with sitting room and bedroom 9 - 16.

Thanks Abu and bmitie

Hope we can have Manhattan now receiving channel 5?
 
You must log in or register to reply here.
Back
Top