Wooshbuild 5 on H2H All good

The new 12 months sub you bought - this needs to go into the ROOT > USR > KEYS folder ... you can either ask your line provider to send you the line details over as a file ready to put into the KEYS folder or you can make the file yourself - either CCCam.cfg or newcamd.list ... you create this with notepad on a computer and be sure you change file type to "all" before hitting save.

Thanks Ste, I did this and now have newcamd.list (with my line in it) showing in usr/keys in the Dreamexplorer plugin.

I did a new scan with autobouquetsmaker but channels are still showing a black screen apart from BBC/ITV/Channels 4&5....

Should it be showing in the Softcam Panel (it isn't btw)?
 
Last edited:
Did you make sure to save it as "all" file type - if you didn't select "all" it would have saved it as newcamd.list.txt which wont work - if you've done it right, you just need to select mgcamd for cam 1 in softcam panel then press green to start and as long as your line is active and you have an internet connection, channels should clear.
 
Did you make sure to save it as "all" file type - if you didn't select "all" it would have saved it as newcamd.list.txt which wont work - if you've done it right, you just need to select mgcamd for cam 1 in softcam panel then press green to start and as long as your line is active and you have an internet connection, channels should clear.
I flashed the box and started over again from scratch, all working now, thanks for your help
 
Hi Guys, im running an old cloud ibox 3 for Vermin with a Openvix image, As this box is no longer supported can i use wooshbuild as a image, if so which version. Thanks in advance
 
EPG Import changed the way they are listed. Look at the bottom of the providers list and you will see UK sat / VM. select all 6 boxes and save your settings.
 
Have bought the h5.2tc which is the easiest image to install aswell as the cline/Nline can’t it be done on a usb stick like wooshbuild use to on the H2s never done a ftp or FileZilla any help aprceited
 
Ive tried dsayers and bioheads images and must say they are PERFECT for the H2H. But I wanted to try Wooshbuild 5 see if it was ok?

So I Installed Wooshbuild 5.
Then Menu - Setup - Service Searching - Tuner Configuration - highlight tuner B - Ok - Then change Net ID to your area - then Green button to save.
Exit back to tv. Green button - Red button (remove plugins) - extensions - highlight autobouquets and press ok - (MESSAGE READS Do you want to remove the plugin "extensions-autobouquets"?) Highlight YES and press OK - exit back to tv - ****NOW THE IMPORTANT PART**** Menu - Standby/Restart - RESTART GUI ****It must be (RESTART GUI) and not just restart!!!!!! (If you press just restart Autobouqets E2 will still be there!!!!!!!!)
Green button - Green button (download plugins) - System Plugins - AutobouqetMaker (ABM) - Download then restart box - Menu - Standby/Restart - RESTART GUI.
Menu - Setup - Service Searching - Autobouqemaker - Configure - change setup mode to Expert - Sheduled scan (turn to ON) - change Time of Scan to Whatever time ( I used 5am) - Press Exit - Providers - make sure Virgin U.K. is (ON) - Virgin Swap Channels is (ON) and your Net Id for your area is there . - Press Exit - Start Scan ( Will now Scan for Channels).
Once finished then Menu - Setup - EPG - Settings - Enable Virgin epg ( change to YES the press GREEN button to Save.
Press Exit back to Setup - CrossEpg -Configure - Schedule Download ( change to wherever ( I used (5.15am).
Press Exit - XMLTV PROVIDERS - Sroll down to bottom and choose RYTEC Virgin U.K. XMLTV then press GREEN to enable - Press Yellow to Download - ( once finished make sure there's a tick on Ryteck virgin uk).
Press Exit.
Providers Start Order - Highlight Rytec Virgin and press GREEN button to move up so RYTEC virgin is at the top!
Press Exit - Download Now - Now will Download the Epg.

Then I FTP into box using Filezilla and transferred my newcamd.list file into usr/keys.
Then Blue Button - Press Down Button once - Press Right Button once - (softcam Panel "control your softcams") - press OK - Highlight Select Cam 1 - Press Right Button Twice till it says mgcamd_1.38rl - press GREEN button this will restart cam. - now exit back to tv.

I then downloaded the VirginHD skin and Installed it aswell.
All Virgin Channels working fine including HD and Epg working g a treat!
If I've missed anything out or done something you thinks wrong guys let me know.

Things to NOTE:
1. I left TUNER A as it was.
2. Always check your using the correct NET ID.
3. I was using a N-line in Mgcamd. (But obviously you can use c:line CCCam).
4. This guide is for Cable ONLY!! But you can run Sky with this also.
5. Big thanks to Wooshman (Wooshbuild is a great build mate)


Might help someone if they fancy using Wooshbuild eh!
 
@newby you've saved me starting a new thread - thank you! I'm having EXACTLY the same problem as you, same error message!

So here's my background with a little more info:

Have a valid working VM nline, that works with my sucmnsee image on a H2H.
I flash the box with the new wooshbuild v5 - all goes on fine.
I disable tuner A, check that tuner B is dvb-c.
I go into plugins, delete AB and install ABM, then reload box.
I ftp over my newcamd and overwrite the old one (I also drag it back off again to check its updated) and then restart mgcam
I go into ABM, into providers, set to VM and my netid, come out 1 level and tell it to do a scan (it reports 300+ channels etc)
I press down on the remote, then into favourites and see a load of folders for channels. I have duplicate sports folders, some are greyed out channels, which dont work, in the other non-greyed out channels, none of them work either.
I then additionally set up the EPG for Rytec
Still no channels displaying?!? It's kinda like the line is dead when no channels display, but it works fine with the sucemnsee build?!

Like newby, I am also getting the following error popping up on the screen:

Getting event info failed. Invalid null reference in method 'iservicehandlerptr_info', arguement 2 of type 'eservicereference const&'


What am I doing wrong?? Apart from a couple of extra steps to sort the EPG out etc, I thought these were exactly the steps to get the image working on the H2H?

Also, with this duplicate bouquets thing, I'm also getting a set of bouquets with '28.2' at the top, these are the folders with the greyed out channels. Removing AB doesn't seems to remove these.


Any help much appreciated. I was up till all hours last night, was close to lobbing the bloody thing out of the window.

Thanks a lot for this, I'm new to the forum and new to flashing boxes, my box had openvix on it , it had audio description turned on and I was unable to turn it off, this was on most HD channels on VM, your instructions were spot on fixed my audio problem and Whooshbuild 5 was so easy to install (following the instructions). I wouldn't mind putting a VM skin on but I've no idea where to get one, could anyone please advise?
 
Thanks a lot for this, I'm new to the forum and new to flashing boxes, my box had openvix on it , it had audio description turned on and I was unable to turn it off, this was on most HD channels on VM, your instructions were spot on fixed my audio problem and Whooshbuild 5 was so easy to install (following the instructions). I wouldn't mind putting a VM skin on but I've no idea where to get one, could anyone please advise?
If you press green button > green again > skins > vmskin-chabs (1.5) or which ever one you want (its right at the bottom)
Let that download > press exit once > go into wb config > change skin boot theme > switch skin > vmhd > yes
Your box will restart
 
Last edited:
Ive tried dsayers and bioheads images and must say they are PERFECT for the H2H. But I wanted to try Wooshbuild 5 see if it was ok?

So I Installed Wooshbuild 5.
Then Menu - Setup - Service Searching - Tuner Configuration - highlight tuner B - Ok - Then change Net ID to your area - then Green button to save.
Exit back to tv. Green button - Red button (remove plugins) - extensions - highlight autobouquets and press ok - (MESSAGE READS Do you want to remove the plugin "extensions-autobouquets"?) Highlight YES and press OK - exit back to tv - ****NOW THE IMPORTANT PART**** Menu - Standby/Restart - RESTART GUI ****It must be (RESTART GUI) and not just restart!!!!!! (If you press just restart Autobouqets E2 will still be there!!!!!!!!)
Green button - Green button (download plugins) - System Plugins - AutobouqetMaker (ABM) - Download then restart box - Menu - Standby/Restart - RESTART GUI.
Menu - Setup - Service Searching - Autobouqemaker - Configure - change setup mode to Expert - Sheduled scan (turn to ON) - change Time of Scan to Whatever time ( I used 5am) - Press Exit - Providers - make sure Virgin U.K. is (ON) - Virgin Swap Channels is (ON) and your Net Id for your area is there . - Press Exit - Start Scan ( Will now Scan for Channels).
Once finished then Menu - Setup - EPG - Settings - Enable Virgin epg ( change to YES the press GREEN button to Save.
Press Exit back to Setup - CrossEpg -Configure - Schedule Download ( change to wherever ( I used (5.15am).
Press Exit - XMLTV PROVIDERS - Sroll down to bottom and choose RYTEC Virgin U.K. XMLTV then press GREEN to enable - Press Yellow to Download - ( once finished make sure there's a tick on Ryteck virgin uk).
Press Exit.
Providers Start Order - Highlight Rytec Virgin and press GREEN button to move up so RYTEC virgin is at the top!
Press Exit - Download Now - Now will Download the Epg.

Then I FTP into box using Filezilla and transferred my newcamd.list file into usr/keys.
Then Blue Button - Press Down Button once - Press Right Button once - (softcam Panel "control your softcams") - press OK - Highlight Select Cam 1 - Press Right Button Twice till it says mgcamd_1.38rl - press GREEN button this will restart cam. - now exit back to tv.

I then downloaded the VirginHD skin and Installed it aswell.
All Virgin Channels working fine including HD and Epg working g a treat!
If I've missed anything out or done something you thinks wrong guys let me know.

Things to NOTE:
1. I left TUNER A as it was.
2. Always check your using the correct NET ID.
3. I was using a N-line in Mgcamd. (But obviously you can use c:line CCCam).
4. This guide is for Cable ONLY!! But you can run Sky with this also.
5. Big thanks to Wooshman (Wooshbuild is a great build mate)


Might help someone if they fancy using Wooshbuild eh!
 
Ive tried dsayers and bioheads images and must say they are PERFECT for the H2H. But I wanted to try Wooshbuild 5 see if it was ok?

So I Installed Wooshbuild 5.
Then Menu - Setup - Service Searching - Tuner Configuration - highlight tuner B - Ok - Then change Net ID to your area - then Green button to save.
Exit back to tv. Green button - Red button (remove plugins) - extensions - highlight autobouquets and press ok - (MESSAGE READS Do you want to remove the plugin "extensions-autobouquets"?) Highlight YES and press OK - exit back to tv - ****NOW THE IMPORTANT PART**** Menu - Standby/Restart - RESTART GUI ****It must be (RESTART GUI) and not just restart!!!!!! (If you press just restart Autobouqets E2 will still be there!!!!!!!!)
Green button - Green button (download plugins) - System Plugins - AutobouqetMaker (ABM) - Download then restart box - Menu - Standby/Restart - RESTART GUI.
Menu - Setup - Service Searching - Autobouqemaker - Configure - change setup mode to Expert - Sheduled scan (turn to ON) - change Time of Scan to Whatever time ( I used 5am) - Press Exit - Providers - make sure Virgin U.K. is (ON) - Virgin Swap Channels is (ON) and your Net Id for your area is there . - Press Exit - Start Scan ( Will now Scan for Channels).
Once finished then Menu - Setup - EPG - Settings - Enable Virgin epg ( change to YES the press GREEN button to Save.
Press Exit back to Setup - CrossEpg -Configure - Schedule Download ( change to wherever ( I used (5.15am).
Press Exit - XMLTV PROVIDERS - Sroll down to bottom and choose RYTEC Virgin U.K. XMLTV then press GREEN to enable - Press Yellow to Download - ( once finished make sure there's a tick on Ryteck virgin uk).
Press Exit.
Providers Start Order - Highlight Rytec Virgin and press GREEN button to move up so RYTEC virgin is at the top!
Press Exit - Download Now - Now will Download the Epg.

Then I FTP into box using Filezilla and transferred my newcamd.list file into usr/keys.
Then Blue Button - Press Down Button once - Press Right Button once - (softcam Panel "control your softcams") - press OK - Highlight Select Cam 1 - Press Right Button Twice till it says mgcamd_1.38rl - press GREEN button this will restart cam. - now exit back to tv.

I then downloaded the VirginHD skin and Installed it aswell.
All Virgin Channels working fine including HD and Epg working g a treat!
If I've missed anything out or done something you thinks wrong guys let me know.

Things to NOTE:
1. I left TUNER A as it was.
2. Always check your using the correct NET ID.
3. I was using a N-line in Mgcamd. (But obviously you can use c:line CCCam).
4. This guide is for Cable ONLY!! But you can run Sky with this also.
5. Big thanks to Wooshman (Wooshbuild is a great build mate)


Might help someone if they fancy using Wooshbuild eh!
WoW is this a available on a download image , that way I won’t mess it all up
 
thx you for your help going find where i can get file from

There is no file and nothing to download, you don't put wooshbuild on the box using a usb any longer, it's flashed online - the box itself downloads the required files, you just paste a code into the box, to get you started, read this:
on your remote, press menu>information>network
in there is an ip address of the box, 192.168 etc, write it down
on your computer, open a new browser and type that ip addresss in the address bar and click enter
this is the interface for your box, on the pc, you can flash it from there by clicking on the 'Terminal' and following infinity installation instructions, takes about 30-40 mins
 
Use the link willo3092 posted in post 157 !
Everything you need is contained there.
Read it fully before you start.
 
Back
Top