zgemma h2s

[skybot1]

Is the box remote volume turned up some time when just after flashing volume is turned right low worth looking at
Regards
Skybot1.

 

[Jim1088]

Ha ha yes volume on TV on

 

[skybot1]

Also press the audio button select other sound track and other settings

 

[skybot1]

Ha ha yes volume on TV on

Tv remote on but is h2s remote turned up

 

[Jim1088]

What settings should audio be on can u but settings image up for me

 

[skybot1]

Menu... Setup...audio..auto language selection

Lan 1. English
Lan 2. Undetermined
Lan 3. Original
Lan 4. None
Prefer ac3 track. Yes
Prefer audio track stored by service. No

 

[skybot1]

Save and reboot the box.
Regards
Skybot1.

 

[Abu Baniaz]

Punctuation and grammar would be helpful. Lots of things are not making sense.

 

[pabloescaban]

Ok you mean freesat and iptv.
It would have saved a dozen posts if you'd said this in your first post.
If you have tried a different hdmi cable and no change, either the hdmi port on tv or box could be buggered.
Try the box and hdmi lead on a different tv
If the same try a second hdmi lead on the second tv, if the same, the hdmi port on the box could be buggered

 

[Jim1088]

My apologies if you do understand me but basically all I need is advice on picture on / sound of

 

[Jim1088]

Tried another tv same should I try factory reset

 

[pabloescaban]

Tried another tv same should I try factory reset

No it will achieve nothing.
If you tried 2 different hdmi leads on the second tv;
Get some phono leads and try these from box to tv
This will confirm that the hdmi port on the box is goosed.

 

[Jim1088]

Thanks try in morn is this a box problem tried a Formuler Z7+ in tv perfect sound / picture perfect

 

[siilver]

So you have no picture and no sound is this correct?

 

[skybot1]

Maybe it’s a image that’s not installed correctly either reflash or try another image you will no then
Regards
Skybot1.

 

[Jim1088]

Picture yes sound no tried on 2nd tv to make sure it's not TV change leads

 

[pabloescaban]

Hdmi port on the box maybe finished
Get some phono leads for a few quid and use them instead but be aware that hd channels won't work using phono leads.

 

[GoldBar]

Try a different HDMI cable from box to tv.
Don't remove or insert HDMI cables when either device is powered on as this can destroy the ports

can the ports be repaired?

 

[pabloescaban]

can the ports be repaired?

I've never heard of one being replaced, though I suppose it is possible, it would probably cost more than a new box as they can be had for around the £60 mark

 

[Jim1088]

Thanks for info no fix yet but taking in your advice