Zgemma H9.2S & H9.2H

but after the crash and the reboot, does infinity load up?
if so, try to run epgimporter, if it causes the crash, uninstall and reinstall the plugin
 
Hi can someone tell if this plugin will work on openatv with whooshbuild installed
 

Attachments

  • Screenshot_20190306-140749_Samsung Internet.jpg
    Screenshot_20190306-140749_Samsung Internet.jpg
    53 KB · Views: 30
Hi all, got the H9.2H with open atv 6.2 running,when i look to flash on the fly there is no image coming up to do it, also when i looked to put wooshbuild on h92h is not listed in the zgemma list.
I know if you can do it if your already running openatv but asi said there is no list to select from. any ideas
thanks in advance
 
Hi all, got the H9.2H with open atv 6.2 running,when i look to flash on the fly there is no image coming up to do it, also when i looked to put wooshbuild on h92h is not listed in the zgemma list.
I know if you can do it if your already running openatv but asi said there is no list to select from. any ideas
thanks in advance

If you have openatv6.2 running you can install infinity now by going to webif, open terminal window and paste the infinity command line in
 
webif wont open as it cant see h92h as its not listed m8

if the box and laptop are connected to the same router/network you can use webif
on remote, ppress menu>information>network, use the box ip address in browser adress bar this will open the window you need, click terminal and away you go
 
if the box and laptop are connected to the same router/network you can use webif
on remote, ppress menu>information>network, use the box ip address in browser adress bar this will open the window you need, click terminal and away you go
got the box hard wired but seems to be having a issue connecting mate, when i run network test it confirms lan connection is green, local connection is red, DHCP is green but ip address is red saying confirmed
 
now on Network test it says local network connected in green, but IP Address is still unconfirmed in red. please
also managed to get openatv 6.3 loaded on
 
Last edited:
now on Network test it says local network connected in green, but IP Address is still unconfirmed in red. please
turn router off at the socket
on remote, press menu>setup>system>network>device setup>nameserver settings
change the nameserver 1 to 8.8.8.8
change nameserver 2 to 8.8.4.4 and click green to save
exit out of all menus
reboot the box or restart gui and go back to see if these settings have saved, if they have, reboot the router then run a network test again
 
turn router off at the socket
on remote, press menu>setup>system>network>device setup>nameserver settings
change the nameserver 1 to 8.8.8.8
change nameserver 2 to 8.8.4.4 and click green to save
exit out of all menus
reboot the box or restart gui and go back to see if these settings have saved, if they have, reboot the router then run a network test again
just checked now its showing my ip address.
 
I'm having big problems with my 9.2H. I used Kodi as a Media Centre to play my collection of movies and TV from a hard drive. While trying to install a UKTVplay plugin I did something and it wiped Kodi back to default. Then things started behaving oddly. Kodi wouldn't play TV but would play movies. Then it wouldn't play movies either. Then Freesat stopped working. All I was getting was black screens.

I was running OpenVix and I had previously had Wooshbuild. I preferred the look of Wooshbuild so I decided to re-install Wooshbuild.
This is what I did -

1) Formatted 32GB Toshiba USB drive I previously used to set the box up (FAT).
2) Downloaded openatv-6.2-zgemmah92h-20190402_usb.zip from OpenAtv website
3) Unzipped above file and copied the contents to USB stick.
4) Went into h9 folder and renamed "noforce" file to "force".
5) Started Box and did Menu>System>Factory reset, let it reboot. Turned it off.
6) Inserted USB into Zgemma 9.2H, held down the reset button on the back, turned it on, waited 2 seconds still holding down the reset button, box LED comes on White but nothing else happens, no TV output. Waited 5 minutes or so.
7) Turned 9.2H off, checked USB still readable on Laptop, it is. Inserted USB into 9.2H, turned it on, didn't press reset, box boots up to what I think is VIX (basic black and white interface)
8) Configured network and then exited startup wizard.
9) I can't get the web interface to work so connected to box with SSH Terminal from Linux
10) tried to run opkg install http://wbuildx.co.uk/setup.ipk I get this -
root@zgemmah92h:~# opkg install http://wbuildx.co.uk/setup.ipk
Downloading http://wbuildx.co.uk/setup.ipk.
Refusing to load file '/var/cache/opkg/b00ee9eca1a4a323632ef0439851ee2c_setup.ipk' as it matches the installed version of enigma2-plugin-extensions-wbi-easy-setup (1.50).
Unknown package 'http://wbuildx.co.uk/setup.ipk'.
Collected errors:
* opkg_solver_install: Cannot install package http://wbuildx.co.uk/setup.ipk.


11) Back to the 9.2H. If I just go to Menu>Plugins the box crashes with this log file


OpenViX Enigma2 Crashlog

Crashdate = Tue Apr 2 21:14:16 2019

Creator = OpenViX
Version = 5.2
Build = 034
Dev = 001
Type = release
Machine = zgemmah9s
URL =[redacted]
Compiled = Mar 21 2019
Skin = ViX-Night-HD/skin.xml
Component = Enigma2

Kernel CMDline = console=ttyAMA0,115200 root=ubi0:rootfs rw ubi.mtd=7,2048 rootfstype=ubifs rootwait mtdparts=hinand:1M(boot),1M(bootargs),1M(baseparam),1M(pqparam),1M(logo),1M(deviceinfo),16M(kernel),234M(rootfs),-(others) mem=1G mmz=ddr,0,0,48M vmalloc=500M
Nim Sockets = NIM Socket 0:
Type: DVB-T2
Name: Si2168
Has_Outputs: no
Frontend_Device: 0
I2C_Device: 0
Supports_Blind_Scan: yes
NIM Socket 1:
Type: DVB-S2X
Name: Si2166D
Has_Outputs: no
Frontend_Device: 1
I2C_Device: 0
Supports_Blind_Scan: yes


in <module>
< 181.756> File "/usr/lib/python2.7/site-packages/urllib3/__init__.py", line 8, in <module>
< 181.756> File "/usr/lib/python2.7/site-packages/urllib3/connectionpool.py", line 36, in <module>
< 181.756> File "/usr/lib/python2.7/site-packages/urllib3/response.py", line 3, in <module>
< 181.756> ImportError: /usr/lib/python2.7/lib-dynload/zlib.so: file too short
< 181.789> [PluginComponent] Plugin Extensions/-easysetup- failed to load: No module named Timershift
< 181.790> Traceback (most recent call last):
< 181.790> File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 53, in readPluginList
< 181.790> File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
< 181.790> File "/usr/lib/enigma2/python/Plugins/Extensions/-easysetup-/plugin.py", line 1, in <module>
< 181.790> File "<string>", line 2, in <module>
< 181.790> File "/usr/lib/enigma2/python/Plugins/Extensions/-easysetup-/mainfile.py", line 1, in <module>
< 181.790> File "<string>", line 8, in <module>
< 181.790> ImportError: No module named Timershift
< 182.189> Current Picon Path : /media/hdd/picon/
< 182.207> [PluginComponent] Plugin Extensions/OpenWebif failed to load: /usr/lib/python2.7/lib-dynload/zlib.so: file too short
< 182.208> Traceback (most recent call last):
< 182.208> File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 53, in readPluginList
< 182.208> File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
< 182.208> File "/home/vix/oe-alliance/builds/openvix/release/h9/tmp/work/all-oe-linux-gnueabi/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1.3.0+gitAUTOINC+6c5cc5632f-r0/git/plugin/plugin.py", line 30, in <module>
< 182.208> File "/home/vix/oe-alliance/builds/openvix/release/h9/tmp/work/all-oe-linux-gnueabi/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1.3.0+gitAUTOINC+6c5cc5632f-r0/git/plugin/httpserver.py", line 17, in <module>
< 182.208> File "/usr/lib/python2.7/site-packages/twisted/web/server.py", line 29, in <module>
< 182.208> ImportError: /usr/lib/python2.7/lib-dynload/zlib.so: file too short
< 182.209> [PluginComponent] Plugin Extensions/WebInterface failed to load: No module named plugin
< 182.542> [AutoTimer] Auto Poll Enabled
< 182.547> [SoftcamManager] AutoStart Enabled
< 182.547> [Hotplug] starting hotplug handler
< 182.551> [eInit] + (42) eServiceFactoryHisilicon
< 182.554> [ABM-main][AutoBouquetsMakerautostart] AutoStart Enabled
< 182.554> [ABM-main][AutoAutoBouquetsMakerTimer] Schedule Disabled at Tue 02 Apr 2019 21:13:38 BST
< 182.554> [CrossEPG_Auto] AutoStart Enabled
< 182.555> [CrossEPG_Auto] Schedule Enabled at Tue 02 Apr 2019 21:13:38 BST
< 182.556> [CrossEPG_Auto] Time set to Wed 03 Apr 2019 04:00:00 BST (now=Tue 02 Apr 2019 21:13:38 BST)
< 182.557> [ImageManager] AutoStart Enabled
< 182.557> [ImageManager] Backup Schedule Disabled at (now=Tue 02 Apr 2019 21:13:38 BST)
< 182.557> [BackupManager] AutoStart Enabled
< 182.557> [BackupManager] Backup Schedule Disabled at (now=Tue 02 Apr 2019 21:13:38 BST)
< 182.559> [Skin] processing screen Screensaver:
< 182.571> [Skin] processing screen SecondInfoBar:
< 182.673> [Skin] Parsing embedded skin <embedded-in-'HideVBILine'>
< 182.674> [Skin] processing screen <embedded-in-'HideVBILine'>:
< 182.679> [Skin] processing screen ChannelSelection:
< 182.708> [Skin] processing screen SlimChannelSelection:
< 182.735> [Skin] processing screen RdsInfoDisplay:
< 182.738> [Skin] No skin to read...
< 182.738> [Skin] processing screen <embedded-in-'RdsInfoDisplaySummary'>:
< 182.738> [eWindowStyleManager] getStyle(style_id=1): NOT FOUND
< 182.740> [Skin] processing screen UnhandledKey:
< 182.752> [Skin] processing screen Dish:
< 182.760> [Skin] processing screen BufferIndicator:
< 182.764> [Skin] processing screen TimeshiftState:
< 182.779> [GUISkin] warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
< 182.784> [Skin] processing screen SubtitleDisplay:
< 182.785> [Notifications] RemovePopup, id = ZapError
< 182.788> [Skin] processing screen InfoBar:
< 182.822> [Skin] Attribute not implemented: alphatest value: blend
< 182.843> [Skin] Parsing embedded skin <embedded-in-'InfoBarSummary'>
< 182.843> [Skin] processing screen <embedded-in-'InfoBarSummary'>:
< 182.846> [eWindowStyleManager] getStyle(style_id=1): NOT FOUND
< 182.855> [Skin] processing screen Menu:
< 182.864> [Skin] No skin to read...
< 182.865> [Skin] processing screen <embedded-in-'MenuSummary'>:
< 182.865> [eWindowStyleManager] getStyle(style_id=1): NOT FOUND
< 182.867> [Skin] processing screen Volume:
< 182.870> [GUISkin] warning, skin is missing element VolumeText in <class 'Screens.Volume.Volume'>
< 182.871> [Skin] processing screen Mute:
< 182.874> [Volume] setValue 100
< 182.874> [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
< 182.874> [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
< 182.878> [Skin] processing screen Scart:
< 182.881> [Skin] processing screen AutoVideoModeLabel:
< 182.883> [Avahi] timeout elapsed
< 182.883> [Avahi] avahi_timeout_update
< 182.883> [LogManager] Trim Poll Started
< 182.894> [LogManager] Trash Poll Started
< 182.895> [NetworkTime] setting E2 time: 1554236018.84
< 182.895> [eEPGCache] time updated.. start EPG Mainloop
< 182.895> [eDVBFrontend0] close frontend
< 182.895> [eDVBFrontend0] sendTone allowed only in feSatellite (1)
< 182.895> [eEPGCache] /media/hdd/epg.dat not found, try /epg.dat
< 182.897> [ChannelSelection] invalid service or time not set and not on a DVB service - try to use fallback DVB service
< 182.899> [ChannelSelection] invalid service or time not set and not on a DVB service - try to use fallback DVB service
< 182.900> [Avahi] watch activated: 0x1
< 182.901> [Console] finished: ('/sbin/ip', '/sbin/ip', '-o', 'addr', 'show', 'dev', 'wlan0')
< 182.913> [Console] command: route -n | grep wlan0
< 182.913> [eConsoleAppContainer] Starting /bin/sh
< 182.913> [Console] finished: ('/sbin/ip', '/sbin/ip', '-o', 'addr', 'show', 'dev', 'eth0')
< 182.914> [Console] command: route -n | grep eth0
< 182.914> [eConsoleAppContainer] Starting /bin/sh
< 182.915> [Avahi] timeout elapsed
< 182.915> [Avahi] Resolving service 'zgemmah92h' of type '_e2stream._tcp'
< 182.915> [Avahi] avahi_timeout_new
< 182.916> [Avahi] avahi_timeout_free
< 182.916> [Avahi] avahi_timeout_update
< 182.917> [Avahi] timeout elapsed
< 182.917> [Avahi] Resolving service 'zgemmah92h' of type '_e2stream._tcp'
< 182.917> [Avahi] avahi_timeout_new
< 182.918> [Avahi] avahi_timeout_free
< 182.918> [Avahi] avahi_timeout_update
< 182.919> [Avahi] timeout elapsed
< 182.919> [Avahi] avahi_timeout_update
< 182.919> [Avahi] timeout elapsed
< 182.919> [Avahi] avahi_timeout_update
< 182.919> [Avahi] timeout elapsed
< 182.919> [Avahi] avahi_timeout_update
< 182.919> [Avahi] timeout elapsed
< 182.919> [Avahi] REMOVE service 'zgemmah92h' of type '_e2stream._tcp' in domain 'local'
< 182.919> REMOVE Peer zgemmah92h
< 182.919> [Avahi] avahi_timeout_update
< 182.919> [Avahi] timeout elapsed
< 182.919> [Avahi] REMOVE service 'zgemmah92h' of type '_e2stream._tcp' in domain 'local'
< 182.919> REMOVE Peer zgemmah92h
< 182.919> [Avahi] avahi_timeout_update
< 182.919> [Avahi] timeout elapsed
< 182.919> [Avahi] avahi_timeout_update
< 182.920> [Avahi] timeout elapsed
< 182.920> [Avahi] Resolving service 'zgemmah92h' of type '_e2stream._tcp'
< 182.920> [Avahi] avahi_timeout_new
< 182.921> [Avahi] avahi_timeout_free
< 182.921> [Avahi] avahi_timeout_update
< 182.922> [Task] job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
< 182.923> [Avahi] timeout elapsed
< 182.923> [Avahi] Resolving service 'zgemmah92h' of type '_e2stream._tcp'
< 182.923> [Avahi] avahi_timeout_new
< 182.925> [Avahi] avahi_timeout_free
< 182.925> [Avahi] avahi_timeout_update
< 182.925> [LogManager] probing folders
< 182.925> [Avahi] timeout elapsed
< 182.926> [Avahi] avahi_timeout_new
< 182.926> [Avahi] avahi_timeout_free
< 182.927> [Avahi] avahi_timeout_update
< 182.927> [Avahi] timeout elapsed
< 182.927> [Avahi] avahi_timeout_new
< 182.927> [Avahi] avahi_timeout_free
< 182.928> [Avahi] avahi_timeout_update
< 182.928> [Avahi] timeout elapsed
< 182.928> [Avahi] avahi_timeout_new
< 182.929> [Avahi] avahi_timeout_free
< 182.929> [Avahi] avahi_timeout_update
< 182.929> [Avahi] timeout elapsed
< 182.929> [Avahi] avahi_timeout_new
< 182.930> [Avahi] avahi_timeout_free
< 182.930> [Avahi] avahi_timeout_update
< 182.931> [Console] finished: route -n | grep wlan0
< 182.933> [LogManager] found following log's: ['/home/root/logs']
< 182.933> [LogManager] looking in: /home/root/logs
< 182.934> [LogManager] /home/root/logs: bytesToRemove -10182944
< 182.936> [Task] job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
< 182.941> [Console] finished: route -n | grep eth0
< 182.941> 0.0.0.0
< 182.941> 192.168
< 182.944> [Network] read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}
< 182.944> [Network] self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '20:32:33:26:b9:e2', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 12], 'up': True, 'mac': '00:17:9a:24:bf:92', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
< 192.552> [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 212.158> [eInputDeviceInit] 1 6c 1
< 212.159> [InfoBarGenerics] KEY: 108 DOWN
< 212.330> [eInputDeviceInit] 0 6c 1
< 212.331> [InfoBarGenerics] KEY: 108 DOWN
< 212.653> [eInputDeviceInit] 1 6c 1
< 212.654> [InfoBarGenerics] KEY: 108 DOWN
< 212.825> [eInputDeviceInit] 0 6c 1
< 212.826> [InfoBarGenerics] KEY: 108 DOWN
< 213.321> [eInputDeviceInit] 1 6c 1
< 213.322> [InfoBarGenerics] KEY: 108 DOWN
< 213.493> [eInputDeviceInit] 0 6c 1
< 213.494> [InfoBarGenerics] KEY: 108 DOWN
< 213.672> [eInputDeviceInit] 1 6c 1
< 213.673> [InfoBarGenerics] KEY: 108 DOWN
< 213.844> [eInputDeviceInit] 0 6c 1
< 213.845> [InfoBarGenerics] KEY: 108 DOWN
< 213.998> [eInputDeviceInit] 1 6c 1
< 213.998> [InfoBarGenerics] KEY: 108 DOWN
< 214.170> [eInputDeviceInit] 0 6c 1
< 214.170> [InfoBarGenerics] KEY: 108 DOWN
< 214.611> [eInputDeviceInit] 1 160 1
< 214.612> [InfoBarGenerics] KEY: 352 OK
< 214.612> [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'
< 214.624> [Skin] processing screen Menu:
< 214.630> [Skin] No skin to read...
< 214.630> [Skin] processing screen <embedded-in-'MenuSummary'>:
< 214.630> [eWindowStyleManager] getStyle(style_id=1): NOT FOUND
< 214.783> [eInputDeviceInit] 0 160 1
< 214.783> [InfoBarGenerics] KEY: 352 OK
< 215.779> [eInputDeviceInit] 1 6c 1
< 215.780> [InfoBarGenerics] KEY: 108 DOWN
< 216.052> [eInputDeviceInit] 0 6c 1
< 216.053> [InfoBarGenerics] KEY: 108 DOWN
< 216.053> [eInputDeviceInit] 1 6c 1
< 216.053> [InfoBarGenerics] KEY: 108 DOWN
< 216.453> [eInputDeviceInit] 2 6c 1
< 216.453> [InfoBarGenerics] KEY: 108 DOWN
< 216.607> [eInputDeviceInit] 0 6c 1
< 216.607> [InfoBarGenerics] KEY: 108 DOWN
< 216.797> [eInputDeviceInit] 1 6c 1
< 216.797> [InfoBarGenerics] KEY: 108 DOWN
< 217.043> [eInputDeviceInit] 0 6c 1
< 217.044> [InfoBarGenerics] KEY: 108 DOWN
< 217.044> [eInputDeviceInit] 1 6c 1
< 217.045> [InfoBarGenerics] KEY: 108 DOWN
< 217.300> [eInputDeviceInit] 0 6c 1
< 217.301> [InfoBarGenerics] KEY: 108 DOWN
< 217.301> [eInputDeviceInit] 1 6c 1
< 217.302> [InfoBarGenerics] KEY: 108 DOWN
< 217.472> [eInputDeviceInit] 0 6c 1
< 217.473> [InfoBarGenerics] KEY: 108 DOWN
< 217.584> [eInputDeviceInit] 1 6c 1
< 217.585> [InfoBarGenerics] KEY: 108 DOWN
< 217.756> [eInputDeviceInit] 0 6c 1
< 217.757> [InfoBarGenerics] KEY: 108 DOWN
< 217.868> [eInputDeviceInit] 1 6c 1
< 217.869> [InfoBarGenerics] KEY: 108 DOWN
< 218.206> [eInputDeviceInit] 0 6c 1
< 218.206> [InfoBarGenerics] KEY: 108 DOWN
< 218.235> [eInputDeviceInit] 1 6c 1
< 218.236> [InfoBarGenerics] KEY: 108 DOWN
< 218.236> [eInputDeviceInit] 0 6c 1
< 218.237> [InfoBarGenerics] KEY: 108 DOWN
< 218.369> [eInputDeviceInit] 1 6c 1
< 218.369> [InfoBarGenerics] KEY: 108 DOWN
< 218.540> [eInputDeviceInit] 0 6c 1
< 218.541> [InfoBarGenerics] KEY: 108 DOWN
< 218.823> [eInputDeviceInit] 1 160 1
< 218.824> [InfoBarGenerics] KEY: 352 OK
< 218.824> [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'
< 218.833> [Skin] processing screen Menu:
< 218.839> [Skin] No skin to read...
< 218.839> [Skin] processing screen <embedded-in-'MenuSummary'>:
< 218.839> [eWindowStyleManager] getStyle(style_id=1): NOT FOUND
< 218.995> [eInputDeviceInit] 0 160 1
< 218.996> [InfoBarGenerics] KEY: 352 OK
< 219.623> [eInputDeviceInit] 1 6c 1
< 219.624> [InfoBarGenerics] KEY: 108 DOWN
< 219.795> [eInputDeviceInit] 0 6c 1
< 219.796> [InfoBarGenerics] KEY: 108 DOWN
< 219.959> [eInputDeviceInit] 1 6c 1
< 219.960> [InfoBarGenerics] KEY: 108 DOWN
< 220.131> [eInputDeviceInit] 0 6c 1
< 220.132> [InfoBarGenerics] KEY: 108 DOWN
< 220.434> [eInputDeviceInit] 1 160 1
< 220.435> [InfoBarGenerics] KEY: 352 OK
< 220.435> [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'
< 220.441> [Skin] processing screen UpdatePlugin:
< 220.445> [GUISkin] warning, skin is missing element tl_off in <class 'Screens.SoftwareUpdate.UpdatePlugin'>
< 220.446> [GUISkin] warning, skin is missing element tl_red in <class 'Screens.SoftwareUpdate.UpdatePlugin'>
< 220.446> [GUISkin] warning, skin is missing element tl_yellow in <class 'Screens.SoftwareUpdate.UpdatePlugin'>
< 220.446> [GUISkin] warning, skin is missing element tl_green in <class 'Screens.SoftwareUpdate.UpdatePlugin'>
< 220.446> [Skin] Attribute not implemented: render value: Label
< 220.447> [Skin] Parsing embedded skin <embedded-in-'SimpleSummary'>
< 220.448> [Skin] processing screen <embedded-in-'SimpleSummary'>:
< 220.449> [eWindowStyleManager] getStyle(style_id=1): NOT FOUND
< 220.451> [OnlineUpdateCheck][adapterAvailable] PASSED
< 220.471> [OnlineUpdateCheck][NetworkUp] PASSED
< 220.471> [OnlineUpdateCheck][getFeedStatus] Checking feeds state
< 220.686> [OnlineUpdateCheck][getFeedStatus] PASSED: stable
< 220.687> [OnlineUpdateCheck][getFeedsBool] stable
< 220.688> Traceback (most recent call last):
< 220.688> File "/usr/lib/enigma2/python/Components/ActionMap.py", line 71, in action
< 220.688> File "/usr/lib/enigma2/python/Components/ActionMap.py", line 51, in action
< 220.688> File "/usr/lib/enigma2/python/Screens/Menu.py", line 60, in okbuttonClick
< 220.688> File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
< 220.688> File "/usr/lib/enigma2/python/Screens/Menu.py", line 74, in runScreen
< 220.688> File "/usr/lib/enigma2/python/Screens/Menu.py", line 80, in openDialog
< 220.688> File "/usr/lib/enigma2/python/mytest.py", line 320, in openWithCallback
< 220.688> dlg = self.open(screen, *arguments, **kwargs)
< 220.688> File "/usr/lib/enigma2/python/mytest.py", line 333, in open
< 220.689> self.execBegin()
< 220.689> File "/usr/lib/enigma2/python/mytest.py", line 248, in execBegin
< 220.689> c.execBegin()
< 220.689> File "/usr/lib/enigma2/python/Screens/Screen.py", line 82, in execBegin
< 220.689> File "/usr/lib/enigma2/python/Screens/SoftwareUpdate.py", line 210, in checkNetworkState
< 220.689> File "/usr/lib/enigma2/python/Components/OnlineUpdateCheck.py", line 273, in kernelMismatch
< 220.689> ImportError: /usr/lib/python2.7/lib-dynload/zlib.so: file too short
< 220.689> [ePyObject] (CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0xb2482da0>>,('OkCancelActions', 'ok')) failed)


dmesg

12) Other symptoms.
If I go to Portal>Media Scanner and find a video on attached hard drive it won't play it. It appears to open it but I just see a black screen and the progress bar doesn't move. If I open an image, it DOES show the image file.

A network scan on Astra 28.2E finds lots of channels but if I select a Freesat Channel, it won't play.

So any ideas why I can't play anything apart from images, and I can't flash from a USB stick I have used before? Or how I can stop it crashing?
 
Last edited:
The h9 boxes are not what there all cracked upto be with poor memory
The h7 is a fare better box by a mile
You only get what you pay for :smiley:
 
Moving on.
The fact that it's saying cannot install Wooshbuild etc is because it's already installed or exists
this is why you get the 'matches installed version' error.
5) you NEVER factory reset any enigma2 box
3) when you unzip image from openatv6.2, there's two files seperate from the flash files in the folder, you need these too in order to flash 6.2 then add infinity.
You are currently running Vix, you may want to edit that URL from the crashlog as it's strictly prohibited here, flash oatv6.2 and add infinity again and see how you get on
 
Back
Top