pabloescaban
VIP Member
I always remember my grandma's last words to me, "what are you doing in here with that hammer?"
I always remember my grandma's last words to me, "what are you doing in here with that hammer?"
Yep this. Very odd shape box lolI think he means to remove the base so he can put it horizontally. I was looking at that the other day lol.
Nopefolks does the GTMEDIA box bring in racing tv channel on sat 28, cheers
Thank youNope
You may have a hybrid LNB in that case you'll need to swap over the Cables on the LNB. Take a pic of the LNB and we can identify it.After reading this thread I’m kinda intrigued now leaning towards getting the GTMEDIA V8 uhd but it would mean i would have to climb & change the lnb as it would be wideband on the mini dish as we originally had SkyQ a while back then it’s finding a sub if anyone could give me some pointers or Pm Cheers
Cheers Ferret’ yeah it’s a wideband LNB by the looks of it 2 way standardYou may have a hybrid LNB in that case you'll need to swap over the Cables on the LNB. Take a pic of the LNB and we can identify it.
If it is a wideband LNB it will need to be changed for either a hybrid LNB if you still use the Skyq box or a universal LNB if not. Either way your up the ladder.
Yep just the two cables coming from mineIts two cables as sky q requires a cable to supply the vertical side off the transponder and cable to supply the horizontal side off the transponder
Needs changing mate if your going to use a GTMedia box
If you don't feel safe going up the ladder DON'T, ask someone else if they can help or get aTie the ladder between the two brackets for safety Undo the f connectors from the l.n.b temporary tie the cables with a cable tie to the satellite dish arm incase they comeaway from the wall Undo the l.n.b holder with star head screw driver Remove the skyq wideband l.n.b
Fit the free sat Universal l.n.b tighten the l.n.b
holder not fully tight until you position the skew angle off the ll.n.b Looking face on at the satellite dish its positioned at 1oclock Fully tighten the l.n.b holder Fit the f connectors tighten and slide the l.n.b cover over the connectors,job done