What's new
By:

Wooshbuild Support Thread

can anybody help me plz tried to install latest wooshbuild 7 on my zgemma h2h every thing is fine till i put my line in and get this. thanks20180127_161843.jpg
 
Funkyman said:
Hi I’m new here. I have installed WB 7 and it works great. Is there any way that when I turn my box on it goes to the last channel I used please ?
Click to expand...
press arrow down on remote to get channel list then menu and there is asetting in there to change it or press epg then menu and it could be there to change its one of them
 
gray1313 said:
press arrow down on remote to get channel list then menu and there is asetting in there to change it or press epg then menu and it could be there to change its one of them
Click to expand...
Hi thanks For the reply. Did what you said but can’t find it
 
Last edited:
hi can anyone help. Since sunday every 3 hours I get a blue screen and loads of writing comes up and then the box reset is there any fix for this without reflashing
 
I have had this problem before and managed to fix it with the help of this forum. The problem is that my zgemma h2h comes out of standby when left overnight. I guess it's something to do with the overnight updates? I cannot find the old fix for this, please could someone help?
 
jazz said:
I have had this problem before and managed to fix it with the help of this forum. The problem is that my zgemma h2h comes out of standby when left overnight. I guess it's something to do with the overnight updates? I cannot find the old fix for this, please could someone help?
Click to expand...
Check in the epg settings as it has a wake up setting in it
The one in the plugins menu

Sent from my SM-G935F using Tapatalk
 
Funkyman said:
Is there any way that when I turn my box on it goes to the last channel I used please ?
Click to expand...
If your box if currently always starting with the same channel rather than the last viewed channel then it may be you have a startup service specified in settings.

To remove the startup service (i.e. the channel selection which always starts when you switch-on your box) do the following:

  1. Identify which channel always starts when you switch-on.
  2. Press down arrow on remote
  3. Navigate within the EPG to the channel selection which always starts when you switch-on your box
  4. Press 'Menu'
  5. Select 'stop using as startup service'
  6. Press 'OK'

Now go to a different channel then restart your box; it should start on the channel last viewed.

I hope that helps.
 
Hi Guys,
Noob here so bear with me and be nice.
Ive got an i55 and just flashed it with v7 wooshbuild. i have my 'line' also. Im unsure how i can input my line as i recieved it by mail rather than i file. can someone help me converting the line to a file which i presume i an just put on my USB stick, or advise how i can input the manually.

Thanks
 
Tezzam88 said:
Hi Guys,
Noob here so bear with me and be nice.
Ive got an i55 and just flashed it with v7 wooshbuild. i have my 'line' also. Im unsure how i can input my line as i recieved it by mail rather than i file. can someone help me converting the line to a file which i presume i an just put on my USB stick, or advise how i can input the manually.

Thanks
Click to expand...

The i55 is an IPTV box, you may be better off asking in the iptv section
 
Tezzam88 said:
Hi Guys,
Noob here so bear with me and be nice.
Ive got an i55 and just flashed it with v7 wooshbuild. i have my 'line' also. Im unsure how i can input my line as i recieved it by mail rather than i file. can someone help me converting the line to a file which i presume i an just put on my USB stick, or advise how i can input the manually.

Thanks
Click to expand...
As per the comment above, the I55 is specifically for iptv, the traditional card sharing that uses a satellite dish won't work. However if you mean how do you add your iptv script, again like above any reasonable provider will tell you how
 
You must log in or register to reply here.
Back
Top