Changing DNS@grog68 , if you don't mind can you explain what edits did you do I am using the normal 8.8.8.8 8.8.4.4 in nameservers 1 and 2 entries.
Good Morning have read all posts and tried everything i can think of but cant get anything to connect to zgemma h7 i.e putty,openwebif filezilla etc.So had to reflash my box last week to enter my username /passwd for vpn this is when i found a problem.Been trying for a week now and i reckon it is the box with a fault.What i am getting is as many others ip address unconfirmed have done all suggetions and still there.Ican take the lan out and put it in my firestick connected with ethernet all perfect working Cant ftp my box to put vpn details in any though Thanks Chrisalts anyone
The box has its own password.Good Morning have read all posts and tried everything i can think of but cant get anything to connect to zgemma h7 i.e putty,openwebif filezilla etc.So had to reflash my box last week to enter my username /passwd for vpn this is when i found a problem.Been trying for a week now and i reckon it is the box with a fault.What i am getting is as many others ip address unconfirmed have done all suggetions and still there.Ican take the lan out and put it in my firestick connected with ethernet all perfect working Cant ftp my box to put vpn details in any though Thanks Chrisalts anyone
Thanks for reply Pabloescaban but where would i find that?The box has its own password.
You have to use this to access the box.
You can set a new password using the remote then use it to access the box via putty or filezilla
Hi mate yes found the password and did a new one this enabled me to get putty working and i put grogbuild on,but still cant ftp to the box says no connection and the ip is still unconfirmed does that make sense?I'm not home, I'm having brekky in the caf, but from memory
Menu, setup, system, network, password setup
Not really although I had something similar a few years ago.Hi mate yes found the password and did a new one this enabled me to get putty working and i put grogbuild on,but still cant ftp to the box says no connection and the ip is still unconfirmed does that make sense?
No joy mate network test shows green tick by lan connection ip address unconfirmed link status red dot and doesnt ftp says cant establish connectionNot really although I had something similar a few years ago.
Unplug the box and router.
Wait five minutes.
Power up the router.
Wait five minutes.
Power up the box.
Check that the box has a network connection and see if you can FTP to it
Have you got any switches etc on the network,?No joy mate network test shows green tick by lan connection ip address unconfirmed link status red dot and doesnt ftp says cant establish connection
Hi steptoe im using static ip and have a 8 port ethernet bridge in line with 2 connections out. i have run a ethernet cable from router to box with same outcomeHave you got any switches etc on the network,?
Are you using a static IP or DHCP,?
If you connect the box directly to the router as above, the problem must be with laptop/pc connection.Hi steptoe im using static ip and have a 8 port ethernet bridge in line with 2 connections out. i have run a ethernet cable from router to box with same outcome
ok done that straight from router to box link status still red and ip unconfirmed still think it may be reciever as when i put the lan cable into my ehternet into firestick go to network i get no problems with connectionIf you connect the box directly to the router as above, the problem must be with laptop/pc connection.
Remove the 8 port bridge and just connect the box and pc
Have you checked in the Lan port of the box to see if any damage or debris like fluff etc, give it a good look over and clean it if required.ok done that straight from router to box link status still red and ip unconfirmed still think it may be reciever as when i put the lan cable into my ehternet into firestick go to network i get no problems with connection
Are you usin VIX last time I tried that and that was just a few months back I had to install samba on my stb to get access via windows file explorer never needed to to that before on vix.Hi mate yes found the password and did a new one this enabled me to get putty working and i put grogbuild on,but still cant ftp to the box says no connection and the ip is still unconfirmed does that make sense?
Hi urie no im using open atv never had probs ike this before so il give it a good clean tommorrow see how we go.Are you usin VIX last time I tried that and that was just a few months back I had to install samba on my stb to get access via windows file explorer never needed to to that before on vix.
If you flashed Grogbuild earlier today, webif must be working?Hi urie no im using open atv never had probs ike this before so il give it a good clean tommorrow see how we go.
I'd say you have an error in your IP addressing,Hi steptoe im using static ip and have a 8 port ethernet bridge in line with 2 connections out. i have run a ethernet cable from router to box with same outcome
hope its ok to ans you 3 guys on this post. Firstly thanks for replies so pabloescaban yes flashed grog yesterday but have to change the port to 23 with filezilla i get ECCONN REFUSED and FTP connect skt #1672 to ip address port 21 can"t establish connectionI'd say you have an error in your IP addressing,
Are you sure you're switch hasn't have you a secondary network,?
have you set the second IP,?
There is another setting too you may need to change, the easiest way is to use DHCP, check it works, IP confirmed, then go into network settings, make a note of what they ALL are, then go to static, enter them ALL as exactly in DHCP mode, except the LAST 3 digits of your IP address, change those to your static address