WooshBuild v3.01- Zgemma 2S + USB Cam Transfer Plugin + BaseBuild - OpenATV 5.1

Status
Not open for further replies.

Peopeers

Member
Right ok hard wired it with a Ethernet plug an had a mess about with the ccams not sure if it worked then messed about with adopter settings an turned of DHCP back to on then when I checked the movies were on then tried the home plugs an now there working then I switched to dhcp back to no, an it's still back on an working except for my BT sports all off then but guess that will be something else ? Cheers Mick
 

wooshman

VIP Member
Thread starter

WooshBuild v4.001 - OpenATV 5.3 Fully Configured

Beta Release

Yet again, easier to install and use than any other version
Finally for the Zgemma 2S
Identical to the H2S build
bootwait.jpg

Please say thank you by clicking the Like / Thanks buttons
Please don't post to say thank you as the thread gets to big.


Before posting your questions or any problems, please read the FAQs here: FAQs for WooshBuild v4.001


includes: Easy setup (new to BaseBuild)
Online Flashing of WooshBuild and future updates
USB Cam Importer - get your channels running quickly and easily - no ftp
Simple channel swaps, additions and removals using bespoke plugin
IPTV Player host updater and descriptions by Benijofar - Details here
Movie & Series Organiser by Grog68 - Details here
Record & Series link names to be more like Sky+
Channel Picons pre-installed and updated automatically
Slyk v4 HD - The best Sky skin there is by Kiddac - Details here
WooshBuild boasts that there is no need for any daunting FTP at any stage
A dedicated FAQ section
More information about WooshBuild can be found here: Clicky click


Just 6 install steps for a new user
Only 4 steps for an existing user
Then only 3 steps for every update after that




IMPORTANT NOTE:


You need this file to start:
BaseBuild Download: Click here to go to downloads

Now you have downloaded BaseBuild, please follow the same instructions for the H2S version here




-----:look here:------------------------------------------------------------------------------------------------
Credits & Acknowledgments

Kiddac for his untouchable Slyk 1 HD v4
Grog68 for his brand new Movie / Series organiser making WooshBuild even closer to Sky+
Willo3092 for his groundwork adding Record and Record Series to the recording menus.
Everyone who used WooshBuild v1, v2 and v2.5, v3 and the v4 Alpha testers, feedback is always the reason for a newer release

What can I say about Benijofar? His relentless testing, idea's, arguing, box flashing, testing, flashing and so on and so on is second to none. I can say that without my friend Beni, everything would be so much harder (or should that say easier). Thank you Benijofar my good friend.

Due to the method in which WooshBuild updates online, "buying the server a beer" is available along with more WooshBuild information by visiting here
I have and always will be happy to run WooshBuild from my own pocket and have never asked for donations but with downloads getting bigger and the number of download increasing month on month the option is now there and is left entirely up to you.

Thank you to those who have already donated.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
Last edited:

plonky

Newbie
really appreciate this build Woosh benji and kiddac but since updating to v4 on my 2s channels are all to cock.. I cant type channels in.. 520 is now 491 sky box office ... For example If I want food network +1 it was 250... now it shows as 279 ..250 food network +1
HELP lol
 

wooshman

VIP Member
Thread starter
really appreciate this build Woosh benji and kiddac but since updating to v4 on my 2s channels are all to cock.. I cant type channels in.. 520 is now 491 sky box office ... For example If I want food network +1 it was 250... now it shows as 279 ..250 food network +1
HELP lol

I am just going to flash exactly the same as you have from v3.03 to v4.001 and see what has happened your end. In the mean time, did you alter anything apart from your region in AutoBouquet Maker?

---------- UPDATE -------------

After flashing first back to v3.03, and then back up to v4.001 (which also checked the online flash was working) I tested both the channel numbers you mention above: 250 and 520

By using the number pad on the remote and entering the channel numbers manually something remarkable happened, my findings were very unusual.......

When it typed 250, it took me to channel 250 which is the Food Network + 1 and then to top that, when I typed in 250 it took me to 250 which is Discovery.

Joking aside, it sounds to me like you have some settings wrong Plonky. These could be in your restored settings, or as I mentioned above, did you change anything in AutoBouquet E2?

To test the theory, flash it again and test before restoring your settings.
 
Last edited:

plonky

Newbie
Don't know what happened after the flash but since I wrote earlier AB E2 scanned at 4am this morning and everything has gone back to normal... cheers for the reply anyhoo Wooshman your testicle support is second to none
 

Ash87

Member
Any help with this please guys?


f7b43ffa5c0e2fe0052937f0fe1e901f.jpg


I've been messing about with EPG settings and managed to lose the event description next to the service provider on the left.. How do I get it back? lol


Sent from my iPhone using Tapatalk




Sent from my iPhone using Tapatalk
 

wooshman

VIP Member
Thread starter
Ash, I would post this on the main forum mate or even in Kiddac's thread. I know it is not a Slyk issue but if anyone knows... Kidda C will know.
 
Help !! I might be being monumentally stupid here, but when you say press and hold standby button do you mean press and hold power button, if you don't mean that wheres the standby button :)
 

TickTack

Member
I installed today from having used a previous version and was dead simple. A big thanks to all that put there time and effort into building and writing such clear instructions!!
 

benijofar

Admin
Staff member
TK Supporter
hi, I'm looking to install the iptvbouqet plug in, but its not in extensions? any idea where i can find it or install it?

IPTV plugin is already there along with the updater ?
Or do you want to add an IPTV bouquet to channel list ?
If yes then hit TV button/Menu button and into add bouquet
Just checked H2S and there are 2 IPTVbouquets in extensions ?
Also showing on 2S using Wooshbuild v4/openatv V5.3
 
Last edited:
hi, I'm trying to install iptv and vod from my server, their instructions are to install the iptvbouqet from plugins, but its not there, only the iptvlistinstaller? i installed the list installer, incase its a newer version of the iptvbouqet plugin, but theres no Chanel file in filezilla to enter the playlist and VOD list into, as instructed? my server just said the plugin should be there, as he runs opanatv and its in his extensions?

here are the instructions I'm supposed to follow

---------- Post Merged at 01:54 AM ----------

but i only have this iptvlistinstaller in my extensions,

---------- Post Merged at 01:54 AM ----------

but i only have this iptvlistinstaller in my extensions,
 

Attachments

  • IMG_1510.jpg
    IMG_1510.jpg
    50.7 KB · Views: 67
Last edited:

dsayers2014

VIP Member
i can see it on vix download plugins, extensions, iptvbouquet (1.0_r0)

maybe start a new thread because it inst wooshbuild related then i can see if i can find an ipk for it
 

benijofar

Admin
Staff member
TK Supporter
Wooshbuild does not delete any of the downloadable files when it is built.
It's possible they are no longer in openatv v5.1 which you are running.
Upgrade to Wooshbuild V4.001/Openatv V5.3 which has the latest info in them.
That plugin shows on my current version of Wooshbuild V4.001
 
Last edited:

benijofar

Admin
Staff member
TK Supporter
Is there any way to check when my line is going to expire as I seem to have forgotten the date?

No.
You will have to ask your supplier for that information or maybe check the date of your email when you received the line details if applicable.
 
Status
Not open for further replies.
Top