I didn't edit the .conf file, post #73 said to edit it so that's what the OP is trying nowIt does not go in the .conf .
Thats was the location etc\tuxbox\configI didn't edit the .conf file, post #73 said to edit it so that's what the OP is trying now
I meant post #76, he was informed to edit the ncam.conf fileThats was the location etc\tuxbox\config
As in edit the ncam.server file in the config folder not edit the ncam.conf
Is that part of the ncam server file?From password done
group = 1,2,3,4,5,6,7,8,9,10,64
emmcache = 2,1,2,1
cccversion = 2.0.11
ccckeepalive = 1
cccmaxhops = 2 # dont use higher than 3 !!!
disablecrccws = 1
cccwantemu = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
audisabled = 1
services = !powervu_fake,!tandberg_fake,!biss_fake,!afn_fake,1708:000000
disablecrccws_only_for = 1709:000000;1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
Yeah all that is above my pay grade.Use either radegast or dvbapi, not both at the same time. Disable/remove the option you aren`t using from ncam.conf or oscam.conf
No other edits are required in these configs, just add your reader to oscam.server
For OE-Alliance and OpenPLi based images the settings below will need applied within the E2 image menu.
Dreambox DreamOS 2.5/2.6 images don`t require any of these changes.
If using radegast change:
Code
Include ECM in HTTP streams - YES
Descramble HTTP streams - NO
Descramble received HTTP streams - NO
Load unlinked userbouquets - YES
If using dvbapi change:
Code
Include ECM in HTTP streams - NO
Descramble HTTP streams - YES
Descramble received HTTP streams - NO
Load unlinked userbouquets - YES
in post 67 he says he has his settings like above so he will use radegast2: Setting as follows in Menu - Settings - Operation & surface - Extras:
Integrate ECM into HTTP streams on YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO
Load unmounted bouquets YES
Post all your configs mate for pablo to send in all edited and prepared.|Obviously without your personal readersin post 67 he says he has his settings like above so he will use radegast
delete the dvbapi in oscam.conf
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
and make sure there is radegast,if that does not work try with dvbapi and the other settings and delete radegast
Yes this is very strange. Because my ccline works 100%.Yeah all that is above my pay grade.
I pasted a reader into his ncam server file and restarted the softcams.
Nothing happened
What's radegast and where does it live.in post 67 he says he has his settings like above so he will use radegast
delete the dvbapi in oscam.conf
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
and make sure there is radegast,if that does not work try with dvbapi and the other settings and delete radegast
In the ncam.conf to disable dvapi change the 1 to 0What's radegast and where does it live.
If he's got dvapi in oscam, delete it and make sure there is radegast, what is it?
How do you know this ?Yes this is very strange. Because my ccline works 100%.
That is not proof it will clear sky DEi was using openvix and i was having no problem with the spanish channels and dazn went in yesterday and all channels but not s.ky sp.#rts geramn
Radegast will look somat like thisWhat's radegast and where does it live.
If he's got dvapi in oscam, delete it and make sure there is radegast, what is it?
Yes but what's the location of radegast, ncam.conf?Radegast will look somat like this
[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam
To Disable dvapi
[dvbapi]
enabled = 0
au = 1
pmt_mode = 0
request_mode = 1
user = Receiver
read_sdt = 2
boxtype = dreambox