What's new
By:
Filters

Is there any tutorial for Install a sky de bouquet for icam and how to Install ncam with Icam patch?

From password done

group = 1,2,3,4,5,6,7,8,9,10,64
emmcache = 2,1,2,1
cccversion = 2.0.11
ccckeepalive = 1
cccmaxhops = 2 # dont use higher than 3 !!!
disablecrccws = 1
cccwantemu = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
audisabled = 1
services = !powervu_fake,!tandberg_fake,!biss_fake,!afn_fake,1708:000000
disablecrccws_only_for = 1709:000000;1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
 
Use either radegast or dvbapi, not both at the same time. Disable/remove the option you aren`t using from ncam.conf or oscam.conf

No other edits are required in these configs, just add your reader to oscam.server/ncam.server



For OE-Alliance and OpenPLi based images the settings below will need applied within the E2 image menu.

Dreambox DreamOS 2.5/2.6 images don`t require any of these changes.



If using radegast change:

Code
Include ECM in HTTP streams - YES
Descramble HTTP streams - NO
Descramble received HTTP streams - NO
Load unlinked userbouquets - YES


If using dvbapi change:

Code
Include ECM in HTTP streams - NO
Descramble HTTP streams - YES
Descramble received HTTP streams - NO
Load unlinked userbouquets - YES
 
linesman66 said:
From password done

group = 1,2,3,4,5,6,7,8,9,10,64
emmcache = 2,1,2,1
cccversion = 2.0.11
ccckeepalive = 1
cccmaxhops = 2 # dont use higher than 3 !!!
disablecrccws = 1
cccwantemu = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
audisabled = 1
services = !powervu_fake,!tandberg_fake,!biss_fake,!afn_fake,1708:000000
disablecrccws_only_for = 1709:000000;1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000
Click to expand...
Is that part of the ncam server file?
Is it added to the reader I posted above?
 
pieeater2015 said:
Use either radegast or dvbapi, not both at the same time. Disable/remove the option you aren`t using from ncam.conf or oscam.conf

No other edits are required in these configs, just add your reader to oscam.server



For OE-Alliance and OpenPLi based images the settings below will need applied within the E2 image menu.

Dreambox DreamOS 2.5/2.6 images don`t require any of these changes.



If using radegast change:

Code
Include ECM in HTTP streams - YES
Descramble HTTP streams - NO
Descramble received HTTP streams - NO
Load unlinked userbouquets - YES


If using dvbapi change:

Code
Include ECM in HTTP streams - NO
Descramble HTTP streams - YES
Descramble received HTTP streams - NO
Load unlinked userbouquets - YES
Click to expand...
Yeah all that is above my pay grade.
I pasted a reader into his ncam server file and restarted the softcams.
Nothing happened
 
sammer said:
2: Setting as follows in Menu - Settings - Operation & surface - Extras:
Integrate ECM into HTTP streams on YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO
Load unmounted bouquets YES
Click to expand...
in post 67 he says he has his settings like above so he will use radegast
delete the dvbapi in oscam.conf

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2

and make sure there is radegast,if that does not work try with dvbapi and the other settings and delete radegast
 
pieeater2015 said:
in post 67 he says he has his settings like above so he will use radegast
delete the dvbapi in oscam.conf

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2

and make sure there is radegast,if that does not work try with dvbapi and the other settings and delete radegast
Click to expand...
Post all your configs mate for pablo to send in all edited and prepared.|Obviously without your personal readers

Im using oscam but if you carnt ill knock up the ncam configs Saturday morning for someone to send in for him.
 
pieeater2015 said:
in post 67 he says he has his settings like above so he will use radegast
delete the dvbapi in oscam.conf

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2

and make sure there is radegast,if that does not work try with dvbapi and the other settings and delete radegast
Click to expand...
What's radegast and where does it live.
If he's got dvapi in oscam, delete it and make sure there is radegast, what is it?
 
i was using openvix and i was having no problem with the spanish channels and dazn went in yesterday and all channels but not s.ky sp.#rts geramn
 
pabloescaban said:
What's radegast and where does it live.
If he's got dvapi in oscam, delete it and make sure there is radegast, what is it?
Click to expand...
Radegast will look somat like this

[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam

To Disable dvapi

[dvbapi]
enabled = 0
au = 1
pmt_mode = 0
request_mode = 1
user = Receiver
read_sdt = 2
boxtype = dreambox
 
Ferret. said:
Radegast will look somat like this

[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam

To Disable dvapi

[dvbapi]
enabled = 0
au = 1
pmt_mode = 0
request_mode = 1
user = Receiver
read_sdt = 2
boxtype = dreambox
Click to expand...
Yes but what's the location of radegast, ncam.conf?
 
You must log in or register to reply here.
Back
Top