hi i am trying to flash my zgemma h2s but having a problem it doesn't boot i have downloaded h5

[Del59]

onto a usb memory stick I am a complete novice at this and would love some guidance I am I missing something

 

[Willo3092]

h5 is the wrong flash for a H2S, you need h3

 

[Del59]

h5 is the wrong flash for a H2S, you need h3

where do I down load h3 from thanks

 

[Willo3092]

It depends what you want to flash really, a brand new image or someone's build.
I don't know how experienced you are but a lot of noobs will go for WooshBuild because it's fairly easy to setup and has most stuff pre-installed.

https://www.wooshbuild.co.uk/

Go to downloads and the H2S build is at the top of the list.

 

[BeakyFord]

@Del59 as you are a novice you are best to use a pre-made image, a popular image is linked below:-

http://www.techkings.org/resources/...55-vu-solo2-duo2-zero-formuler-f1-edision.47/

IF you have issues getting the receiver to FLSH check the link below (many have... so best to check the link below before you begin)

http://www.techkings.org/resources/preparing-flash-drives.41/

 

[Del59]

thanks for all your help I will try what you all recommended but being a bit green to all this it may take me some time

 

[BeakyFord]

the 1st link I gave is for WB, read 1st post on page 1, IF you have any issues look in the WB support thread:-
http://www.techkings.org/threads/wooshbuild-support-thread.109525/

 

[Del59]

hi all, done what was recommended the box came up with flash but still won't boot

 

[steptoe]

hi all, done what was recommended the box came up with flash but still won't boot

you may have to press the front power button when the display shows FLSH

 

[Del59]

hi all still having problems with booting my zgemma h2s box I get as far as flash but still it won,t reboot I tried Kinston memory stick and also scandisk but no joy any more help would be gratefully appreciated