Zgemma H9S SE Tuner Configuration.

[JideJames]

No, I did not

There's no password option on my network path

There's no password option on my network path

I have set the new password on webif

 

[Ferret.]

I have set the new password on webif

So login via telnet and run that command Abu gave you

cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt

Then retrieve the file with filezilla from the tmp folder.

Or just post a pic of the dish for LNB identification.

 

[JideJames]

Do as @cactikid says to change the images password then follow this to use file zilla

1.Download and install Filezilla from here and install on your laptop/PC.

2. On your ZGemma box, from the remote control, go to:
MENU - INFO PANEL - INFOS - NETWORK
Near the top of the page it should show:
Internet address: ###.###.#.### ( numbers should replace the hash tags )
Take a note of this internet address.
I use openATV but on other builds there may be different MENU options you may have to go under to find the internet address but it should be in the Network option.

3. Once Filezilla is installed on your laptop/PC, open the program and you should have a screen similar to this:

A = This is where to put the internet address that we took a note of earlier.

B = The username is: root

C = Press the quickconnect button to connect to your ZGemma box.

D = The left side panel is the contents of your laptop/PC.

E = The right side panel will show the contents of what you are connecting to.

F = Like I said before, the left side panel is the contents of your laptop/PC. From here you can choose the file(s) that you wish to transfer to your box.

G = The right side panel should now show you the contents of your ZGemma box.



4. To transfer a file over to your ZGemma box you must follow these steps:

-Once connected to your box, on the right side panel, find and open the destination folder you are going to put the file that you are transferring over etc/enigma2 in your case.
-On the left side panel, find the file that you are going to be transferring over to your box.
-Then just drag and drop it.



Thats it, you just transferred a file from your laptop/PC over FTP to your ZGemma box.

I am now connected successfully to Filezilla

Forget about the IPTV for now, that's easily fixed.
Open webif on your laptop or computer.
Click Terminal on the left side.
Type Root
Click enter.
Type your password
Click enter
Paste this in and click enter again

cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt

Do as @cactikid says to change the images password then follow this to use file zilla

1.Download and install Filezilla from here and install on your laptop/PC.

2. On your ZGemma box, from the remote control, go to:
MENU - INFO PANEL - INFOS - NETWORK
Near the top of the page it should show:
Internet address: ###.###.#.### ( numbers should replace the hash tags )
Take a note of this internet address.
I use openATV but on other builds there may be different MENU options you may have to go under to find the internet address but it should be in the Network option.

3. Once Filezilla is installed on your laptop/PC, open the program and you should have a screen similar to this:

A = This is where to put the internet address that we took a note of earlier.

B = The username is: root

C = Press the quickconnect button to connect to your ZGemma box.

D = The left side panel is the contents of your laptop/PC.

E = The right side panel will show the contents of what you are connecting to.

F = Like I said before, the left side panel is the contents of your laptop/PC. From here you can choose the file(s) that you wish to transfer to your box.

G = The right side panel should now show you the contents of your ZGemma box.



4. To transfer a file over to your ZGemma box you must follow these steps:

-Once connected to your box, on the right side panel, find and open the destination folder you are going to put the file that you are transferring over etc/enigma2 in your case.
-On the left side panel, find the file that you are going to be transferring over to your box.
-Then just drag and drop it.



Thats it, you just transferred a file from your laptop/PC over FTP to your ZGemma box.

Should I create a file on the left hand side, copy and paste the code inside it, as a text message. then drag and drop it on the right hand side

So login via telnet and run that command Abu gave you

cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt

Then retrieve the file with filezilla from the tmp folder.

Or just post a pic of the dish for LNB identification.

I have attached the picture, I don't know if that would help

 

[Ferret.]

Should I create a file on the left hand side, copy and paste the code inside it, as a text message. then drag and drop it on the right hand side

No that guide was just to get you connected .

Follow Abu advice and run this command

cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt

Then retrieve the file from the tmp folder with filezilla.

To be honest this thread is a case of too many cooks spoil the broth follow what Abu said and post a pic of the dish even if its on zoom and the file from tmp folder.

Im out to avoid even more confusion for you.

 

[JideJames]

 

[JideJames]

sorry, I hope that is what you mean

 

[Ferret.]

View attachment 67951

Your right mate i carnt make out what LNB that is maybe someone can.

 

[JideJames]

There's no password option on my network path

I have now set the password on the box

 

[pabloescaban]

If you can see the text in that text file, copy it all and paste it into your next post in this thread

 

[Drox]

View attachment 67951

It has the characteristics of a wideband lnb as the wires are behind one another rather than side by side but can’t say for definite.

 

[JideJames]

maybe we should have a break, we will continue later. Thank you all for your help, so far.

 

[JideJames]

Issue this command in Putty or webif terminal client. FTP the file called mytunerconfig that will be created in /tmp to your PC, then upload it here

cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt

Hello, I have been able to copy and upload the code to Filezilla, so what should I do from there?

 

[pabloescaban]

Hello, I have been able to copy and upload the code to Filezilla, so what should I do from there?

Go to tmp folder.
Open the mytunerconfig text file.
Copy all
Paste the text here

 

[JideJames]

Go to tmp folder.
Open the mytunerconfig text file.
Copy all
Paste the text here

I believe, I have done that

 

[pabloescaban]

So what does it say?
You haven't posted the text here?

 

[JideJames]

So what does it say?
You haven't posted the text he

I can't copy and paste but it is there

 

[pabloescaban]

I can't copy and paste but it is there

You haven't understood the instructions.
1. You issue the command in webif or putty.
2. That command creates a text file with tuner details in it.
3. You open that file with notepad and let us know what it says.
No more than two minute job

 

[JideJames]

You haven't understood the instructions.
1. You issue the command in webif or putty.
2. That command creates a text file with tuner details in it.
3. You open that file with notepad and let us know what it says.
No more than two minute job

config.Nims.0.dvbs.advanced.sats=282
config.Nims.0.dvbs.diseqcA=282
config.Nims.0.dvbs.diseqcB=3601
config.Nims.0.dvbs.diseqcC=3601
config.Nims.0.dvbs.diseqcD=3601

 

[pabloescaban]

config.Nims.0.dvbs.advanced.sats=282
config.Nims.0.dvbs.diseqcA=282
config.Nims.0.dvbs.diseqcB=3601
config.Nims.0.dvbs.diseqcC=3601
config.Nims.0.dvbs.diseqcD=3601

Thats the spirit.
Unfortunately I have no idea what any of that means, @Abu Baniaz will be able to advise you

 

[woody6222]

config mode--------:-simple
mode--------------- :-single
satellite:-------------:-28.2E Astra 2E/2F/2G
send diseqc-------- :-no
force legacy signal :- no
with left and right arrows change to above
Green button save/exit and reboot