Zgemma H9T

[biff2005]

Zgemma H9T

anyone got one of these, what are they like ? performance wise..

https://www.zgemma.co.uk/shop/zgemmah9t

 

[adamspaul97]

Hi I've had one about 9months now and they are excellent must faster than other zgemma boxes inc my old h2h which I use as a second box upstairs

 

[Abu Baniaz]

The H9 receivers have only 256MB of internal flash memory.

 

[biff2005]

i have an H.2H already but want a second box for the bedroom :)

 

[biff2005]

The H9 receivers have only 256MB of internal flash memory.

Specification:

• ARMprocessorwith1500MHz Quad-coreCPU
• OneDVB-T2/CHybrid tunerbuilt-in
• Support4K-2160p
• 256MB NAND Flash / 1GB DDR3 Memory
• Picture inPicture(PIP)
• 1xUSB3.0and1xUSB2.0
• 1xHDMI2.0
• 1x3.5mm AV
• Externalpowersupply12V1A

 

[biff2005]

The H9 receivers have only 256MB of internal flash memory.

are these boxes worth buying then ??

 

[Abu Baniaz]

They are snappy and energy efficient and very small. Just cant install too many things on them. You can use flash expander though.

 

[Willo3092]

There's a method of expanding the flash memory using microsd here:

https://www.opena.tv/air-digital-zgemma-h9/40658-expand-rootfs-8gb.html

 

[jwjc]

hi can anyone help I am strugging to install mgcamd 1.35a on my h9t box I have tried going to default skin but still nothing

 

[Graham19811981]

Don’t think you can have it on open atv 6.2 I haven’t tried it but have got it working on vix image! You can try it but others will be able to tell you for definitely! Command line this what @dsayers2014 gave us 👍
opkg install https://www.dropbox.com/s/h9rusq0rj...d.1.35a_1.0-r3_cortexa15hf-neon-vfpv4.ipk?dl=

 

[jwjc]

Don’t think you can have it on open atv 6.2 I haven’t tried it but have got it working on vix image! You can try it but others will be able to tell you for definitely! Command line this what @dsayers2014 gave us 👍
opkg install https://www.dropbox.com/s/h9rusq0rj...d.1.35a_1.0-r3_cortexa15hf-neon-vfpv4.ipk?dl=

think you are correct any idea where I can get the ccam 2.3.2 you mentioned earlier

 

[Graham19811981]

Not me mate! Only other option flash with vix in @Willo3092 download and you can use Mgcamd 1.35
wget --no-check-certificate -O install_vix.sh http://www.willobuild.xyz/Scripts/install_vix.sh && bash install_vix.sh

 

[jwjc]

Not me mate! Only other option flash with vix in @Willo3092 download and you can use Mgcamd 1.35
wget --no-check-certificate -O install_vix.sh http://www.willobuild.xyz/Scripts/install_vix.sh && bash install_vix.sh

ok thanks for your help

 

[Graham19811981]

That was the command line for it there mate copy paste in webif or whatever

 

[pabloescaban]

think you are correct any idea where I can get the ccam 2.3.2 you mentioned earlier

if it's not installed in softcam panel already, click blue button and see if its in the list, then install it from there

 

[jwjc]

hi there
still struggling it wont install 2.3.2 its saying syntax error near un expected token

 

[BeakyFord]

your H9 is an ARM system so the standard cams on ATV are cccam or oscam, PurE2 can run MG 1.35 but its a new OS in development & is still in its testing phase. The easiest option IF you're not into making images & still want to use MGcmd would be to go with Willobuild as advised above (VIX)

 

[pabloescaban]

hi there
still struggling it wont install 2.3.2 its saying syntax error near un expected token

Which softcams are already installed?
go to softcam panel, click on the active cam (make sure the other is set to 'no cam') and click left/right, list here the softcams that are already on the box, there will be a few

 

[jwjc]

Which softcams are already installed?
go to softcam panel, click on the active cam (make sure the other is set to 'no cam') and click left/right, list here the softcams that are already on the box, there will be a few

I can only find softcam manager when I open it theres nothing in it

 

[pabloescaban]

this is because you have no softcams installed...from a blank screen:
press green
press green again
choose softcams
install oscam softcams and also CCcam2.3.2

this will create a softcam panel for you to play with