Please be more specific of the problems your having.Hi Guys
Have new Gigablue for bedroom.
I just cannot get it working.
Need your expert help please
Thanks in advance
With a splitter yes.My guess is 2FBC boxes to 1 unicable LNB. Can it be done?
With a splitter or just use one as master box and other uses client modeMy guess is 2FBC boxes to 1 unicable LNB. Can it be done?
My guess is 2FBC boxes to 1 unicable LNB. Can it be done?
I've only stopped doing the build for Zgemma H2S/H and the Zgemma H52TC as these were unsupported by OpenViX and took a fair bit of time and money to maintain.Should I use willobuild? There was something about closing down.
Thanks for keeping your build goingI've only stopped doing the build for Zgemma H2S/H and the Zgemma H52TC as these were unsupported by OpenViX and took a fair bit of time and money to maintain.
Have you changed the provider settings in autobouquetsmaker to your local area?
There's a guide for connecting to your box with putty here: https://www.willobuild.net/files/Utilities/putty.zip
I wondered why you could see 5.4 at the top.Why are you posting a screenshot that you posted in a different thread last June?
One unicable to splitter and two separate cables to each Gigablue.So have you got just one cable going from the splitter to the receiver?
One unicable to splitter and two separate cables to each Gigablue.
Last night set up through previous instructions on how to get the 8 Demodulators working.
Make sure your not using the same scr frequecies on both boxes they need to be different from box 1.Had all the Tv progs last night in new gigablue. They seem to off vanished? Could this because other Gigablue is working downstairs. Changed user band to 9.. 16
Error SID not found in Pat